Pioneer DVH-P4100UB operation manual Setting the speaker setting

Page 58

Section

03Available accessories

7Plug the microphone into the micro- phone input jack on the multi-channel pro- cessor.

an extended period, high temperatures may cause distortion, color change or malfunction.

8Press MULTI-CONTROL to start the auto TA and EQ.

9Get out of the car and close the door within 10 seconds when the 10-second count-down starts.

The measurement tone (noise) is outputted from the speakers, and auto TA and EQ be-

gins.

# When all speakers are connected, auto TA

and EQ is completed in about nine minutes.

# To stop auto TA and EQ, press any keys.

# To cancel auto TA and EQ part way through, press BAND/ESC.

10When auto TA and EQ is completed, COMPLETE is displayed.

When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Under- standing auto TA and EQ error messages on page 67.)

11Press BAND/ESC to cancel the auto TA and EQ mode.

12Store the microphone carefully in the glove compartment.

Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for

Setting the speaker setting

You need to make with/without (or yes/no) and size (bass reproducing capacity) selection/ad- justments depending on the installed speak- ers. The size needs to be set to LRG (large) if the speaker is capable of reproducing sounds of about 100 Hz or below. Otherwise select SML (small).

!Low frequency range is not output if the subwoofer is set to OFF and the front and rear speakers set to SML or OFF.

!It is imperative that non-installed speakers be set to OFF.

!Set the front or rear speaker to LRG if the speaker is capable of reproducing bass content, or if no subwoofer is installed.

1Use MULTI-CONTROL to select FRONT (speaker setting) in the audio function menu.

Refer to Introduction of DSP adjustments on page 52.

2Press cor dto select the speaker to be adjusted.

FRONT (front speakers)—CENTER (center speaker)—REAR (rear speakers)—SUB.W (subwoofer)—PHASE (subwoofer setting)

#You can switch to PHASE only when the sub- woofer has been set to ON.

3Press aor bto select the correct size for the selected speaker.

OFF (off)—SML (small)—LRG (large)

#You cannot select OFF, when FRONT (front speakers) have been selected.

#You can select ON or OFF, when SUB.W (sub- woofer) has been selected.

#You can switch REV (reverse phase) or NOR (normal phase), when PHASE (subwoofer setting) has been selected.

58 En

Image 58
Contents DVH-P4100UB Contents Thank you for purchasing this Pioneer productSelecting audio output Using the dynamic range control Using the direct control About this unit Before You Start To ensure safe drivingClass 1 Laser Product Case of trouble FeaturesBefore You Start About this manual Visit our websiteProtecting your unit from theft When an operation is prohibitedAbout DivX Using the remote control Use and care of the remote controlInstalling the battery Removing the front panelHead unit Operating this unit What’s whatOperating this unit Operating this unit Remote control Using the remote control operation mode switch DVH mode operationDisplay indication DVD mode operationOperating this unit DVD mode operation RDSSelecting a source Power ON/OFFBasic Operations Turning the unit onBasic Operations Adjusting the volumeTuner Storing and recalling broadcast frequenciesIntroduction to advanced operations Switching the RDS displayReceiving PTY alarm broadcasts PTY listSelecting alternative frequencies Tuning in strong signalsStoring the strongest broadcast frequencies FM OFF-LEVEL1-LEVEL2-LEVEL3 LEVEL4 MW/LW OFF-LEVEL1-LEVEL2Receiving traffic announcements Using PI SeekUsing Auto PI Seek for preset stations Limiting stations to regional programmingOperating Operating this unit Built-in DVD playerThis unit Operating the DVD menu Switching the media file typeBasic playback controls PBC playbackCM skip/CM back Playing DivX VOD contentResume playback Bookmark Searching for the part you want to play Specifying titleSpecifying track Changing audio language during playback Multi-audioAudio Changing the viewing angle during playback Multi-angleAngle Return to the specified scene Frame-by-frame playbackSlow motion playback Automatic playback of DVDsSelecting titles from the title list Selecting files from the file name listSelecting tracks from the track title list Selecting a repeat play rangePlaying tracks/files in random order Scanning folders and tracksUsing advanced sound retriever Pausing playbackSelecting the play mode Selecting audio outputSwitching the information display Rotating the displayed pictureUSB portable audio player USB memorySelecting a file directly in the current folder Function and operationScan Browsing for a song/video Operating this unit IPodSearching songs by category Searching by alphabet in the list Displaying text information on iPodBAND/ESC Playing songs/videos in a random order shuffle Playing all songs/videos in a random order shuffle allOperating this unit’s iPod function from your iPod Playing songs related to the currently playing songChanging audiobook speed Introduction of audio adjustments Audio AdjustmentsChanging the screen mode Information displayAdjusting equalizer curves Using balance adjustmentUsing the equalizer Adjusting bass/mid/trebleAdjusting loudness Adjusting source levelsIntroduction of DVD setup Operating this unit Setting up the DVD playerSetting the subtitle language AdjustmentsSetting the character set Setting the on screen display languageSetting the menu language Setting the angle icon displaySetting the parental lock Setting the aspect ratioSetting the slide show interval Setting the code number and levelChanging the level Setting the DivX subtitle fileIf you forget your code number Setting the down sampling output Setting for digital outputDisplaying your DivX VOD registration code Switching Auto PI Seek Operating this unit Initial SettingsAdjusting initial settings Setting the FM tuning stepSwitching the auxiliary 1 setting Switching the sound muting/ attenuationSetting the AV input Switching the auxiliary 2 settingMulti language display setting Switching the ever scrollSelecting the illumination color Resetting the audio functions Setting the display connection on or offCorrecting distorted sound About AUX1 and AUX2 Using the AUX sourceOther Functions AUX1 sourceSwitching between digital and analog Using the external unitUsing the PGM button Introduction of DSP adjustments Using the position selector Available accessoriesAvailable accessories Using the sound field control Using the Dolby Pro LogicAdjusting the Music mode Using the dynamic range control Using the down-mix functionUsing the direct control Auto TA and EQ auto-time alignment and auto-equalizing Using the auto-equalizerBefore operating the auto TA and EQ function Carrying out auto TA and EQ Setting the speaker setting Correcting the subwoofer’s phase Adjusting the speaker output levelsSelecting a cross-over frequency Adjusting the speaker output levels using a test tone Using the time alignmentAdjusting 3-band parametric equalizer Adjusting the time alignmentPOWERFUL-NATURAL-VOCAL-FLAT- CUSTOM1-CUSTOM2-SUPER-BASS Available accessories Additional Information Troubleshooting CommonProblems during Video CD playback Additional InformationError messages Problems during multi-channel processor connectionVice ERROR-MIC DVD discs Additional Information Handling guideline of discsPlayer DVD-R/DVD-RW discsCD-R/CD-RW discs Avchd recorded discsDual Discs Compressed audio files on the disc Compressed audio compatibilityHandling guideline and supplemental information USB audio player/USB memorySequence of audio files on the disc Example of a hierarchySequence of audio files on USB memory About handling the iPod About iPod settingsIPod compatibility Jpeg picture filesDivX video files Russian character chartDivX compatibility Additional Information Language code chart for DVD Language code, input codeAdditional Information Copyright and trademark notice 76 En Additional Information Terms DTSMpeg JpegMS Adpcm VBR Additional Information Specifications USBPioneer Corporation Meguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan

DVH-P4100UB specifications

The Pioneer DVH-P4100UB represents a compelling blend of advanced technology and user-friendly functionality that caters to the modern driver. Designed for superior in-car audio performance, this double DIN multimedia receiver supports various media formats, ensuring that audiophiles and casual listeners alike can enjoy their favorite tunes.

One of the standout features of the DVH-P4100UB is its compatibility with a wide array of audio formats. It can effortlessly play CDs, MP3s, WMA, and even AAC files. Additionally, it supports USB connections, allowing users to plug in their USB flash drives or external hard drives filled with music, making it easy to access vast libraries of songs on the go. The device also integrates seamlessly with iPod and iPhone through Pioneer’s proprietary interface, enabling full control over playback and the ability to browse through playlists and albums directly from the receiver's display.

The seven-band graphic equalizer is another remarkable aspect of this model. Users can customize their audio experience by adjusting the frequency levels to their liking, ensuring optimal sound quality tailored to their preferences. The DVH-P4100UB is equipped with advanced sound retriever technology, which enhances the sound quality of compressed audio files, bringing back the richness lost during compression.

Integration with Bluetooth technology allows hands-free calling and wireless audio streaming. With a built-in microphone, drivers can easily take calls while keeping their hands on the wheel, enhancing safety without compromising communication. The receiver also has compatibility with various smartphone applications, paving the way for even more integrated functionality.

For visual engagement, the DVH-P4100UB boasts a bright 3-inch display, providing clear and easy navigation through menus and album art. The interface is designed for intuitive use, minimizing distractions while driving.

Installation is straightforward, fitting neatly into standard double DIN spaces in most vehicles. With an array of adjustable settings and expandability options, including preamp outputs for additional amplifiers or subwoofers, the Pioneer DVH-P4100UB stands out as a versatile multimedia receiver, embodying both quality engineering and modern-day technology. Whether you’re an audiophile or a casual listener, this device offers a superior auditory experience built for today’s digital age while prioritizing ease of use and safety.