Audio Adjustments
Fine adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ Low/EQ Mid/EQ High).
Section
08
4 Press Eor eto select the desired Q |
| |
factor. | English | |
Press Eor euntil the desired Q factor | ||
| ||
appears in the display. |
| |
2 |
|
•Pressing 5or ∞on the head unit also per- forms the same operation.
Level (dB)
Q=2N
Q=2W
Note | Español |
• If you make adjustments when a curve other | |
|
Center frequency Frequency (Hz)
1Press A and hold unitil frequency and the Q factor (e.g., F 80 Q 1W) appears in the dis- play.
• Pressing and holding AUDIO on the head unit also performs the same operation.
2Press A to select the desired band for adjustment.
• Pressing AUDIO on the head unit also per- forms the same operation.
3Select the desired frequency with
1or ¡.
Press 1or ¡until the desired frequency appears in the display.
Low :
Mid :
High : 3.15
•Pressing 2or 3on the head unit also per- forms the same operation.
than CUSTOM2 is selected, CUSTOM1 curve |
| |
is updated. |
| |
Adjusting bass | Deutsch | |
You can adjust the | ||
bass level. | ||
|
•In FRT1 mode, bass adjustment affects only the rear output: front output cannot be adjusted.
• Pressing AUDIO on the head unit also per- | Français |
1 Press A to select Bass. |
|
Press A until Bass appears in the display. |
|
forms the same operation. |
|
2 Select the desired frequency with 1or |
|
¡. | Italiano |
Press 1or ¡until the desired frequency |
|
appears in the display. |
|
• Pressing 2or 3on the head unit also per- |
|
forms the same operation. |
|
3 Press Eor eto adjust the bass level. | Nederlands |
forms the same operation. | |
Each press of Eor eincreases or decreases |
|
the bass level. +6 – |
|
increased or decreased. |
|
• Pressing 5or ∞on the head unit also per- |
|
En 57