Section
12Additional Information
Common problems (continued)
Symptom | Cause |
There’s no picture. | The parking brake cord is not |
| connected. |
Remedy
Connect a parking brake cord, and apply the parking brake. (See page 90.)
The parking brake is not applied.
Connect a parking brake cord, and apply the parking brake. (See page 90.)
The prohibited mark “ ” is displayed, and operation is not possible.
The operation is prohibited for | This operation is not possible. |
the disc. |
|
|
|
The operation is not compati- | This operation is not possible. |
ble with the disc’s organiza- |
|
tion. |
|
The picture stops (pauses) and the unit cannot be operated.
Reading of data has become | After pressing 7once, start playback |
impossible during playback. | once more. |
There’s no sound. | The volume level is low. | Raise the volume level. | |
Volume level is low. |
|
| |
The attenuator is ON. | Switch the attenuator OFF. | ||
| |||
|
|
| |
There’s audio and video | This unit is not firmly secured. | Secure this unit firmly. | |
skipping. |
|
|
The picture is stretched, the aspect is incorrect.
The aspect setting is incorrect for the display.
Select the appropriate setting for your display. (See page 67.)
Rear display picture | The source disc being listened |
disappears. | to with the head unit has been |
| ejected. |
Before ejecting the disc, switch the source. This problem may occur when certain connection methods are used.
When the ignition switch is turned ON (or turned to ACC), the motor sounds.
This unit confirms whether a | This is a normal operation. |
disc is loaded or not. |
|
82En