Initial Settings
Adjusting initial settings
1
Initial settings lets you perform initial set up of different settings for this unit.
1FUNCTION display
Shows the function status.
1Press SOURCE and hold until the unit turns off.
• Pressing SOURCE on the head unit also per- forms the same operation.
2Press F and hold until time appears in the display.
• Pressing and holding FUNCTION on the head unit also performs the same operation.
3Press F to select one of the initial settings. Press F repeatedly to switch between the follow- ing settings:
Use the following instructions to operate each particular setting.
•To cancel initial settings, press BAND/ESC.
•You can also cancel initial settings by holding down F until the unit turns off.
•Pressing FUNCTION on the head unit also performs the same operation.
•D.ATT can only be operated when you have connected the
Section
10
Setting the time
This is used to set the time on the unit’s clock | English |
| |
display. |
|
1 Press F to select the CLOCK. |
|
Press F until the time appears in the display. |
|
•Pressing FUNCTION on the head unit also performs the same operation.
2 Select the portion of the time display you | Español | |||||||||
| ||||||||||
wish to set with 1or ¡. |
| |||||||||
Pressing 1or ¡will select a portion of the |
| |||||||||
clock display: |
| |||||||||
| ||||||||||
As you select portions of the clock display the | Deutsch | |||||||||
portion selected will blink. | ||||||||||
| ||||||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
• Pressing 2or 3on the head unit also per- |
| |||||||||
forms the same operation. | Français | |||||||||
Pressing Ewill increase the selected hour or | ||||||||||
3 Select the correct time with Eor e. |
| |||||||||
minute. Pressing ewill decrease the selected |
| |||||||||
hour or minute. |
| |||||||||
• Pressing 5or ∞on the head unit also per- |
| |||||||||
forms the same operation. | Italiano | |||||||||
Setting the FM tuning step | ||||||||||
| ||||||||||
The FM tuning step employed by seek tuning |
| |||||||||
can be switched between 100 kHz, the preset | Nederlands | |||||||||
step, and 50 kHz. | ||||||||||
|
En 71