Eizo CE240W, CE210W user manual Attaching AN ARM, Attach an arm stand to the LCD monitor securely

Page 32

6. ATTACHING AN ARM

6. ATTACHING AN ARM

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor.

NOTE

•If you will use the arm or stand of other manufacturers, conﬁrm the followings to the manufacturers before selecting.

-Hole spacing on the arm mounting

CE210W : 100 mm x 100 mm (VESA compliant)

CE240W : 100 mm x 100 mm (VESA compliant) or 200 mm x 100 mm (VESA compliant)

-Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable

-TÜV/GS approved arm or stand

•Please connect cables after attaching an arm stand.

•This monitor does not support the portrait display.

Setup Procedure

1

2

Lay the LCD monitor down. Do not scratch the panel.

Remove the tilt stand by loosening the screws

Unscrew the four screws securing the unit and the satand with the screwdriver.

3Attach an arm stand to the LCD monitor securely.

Secure the monitor to the arm or stand using the screws speciﬁed in the user's manual of the arm or stand.

CE210W

Arm-Stand:

4 Mounting Screws (enclosed): M4 x 12 mm

32

Image 32

Contents Safety Symbols Precautions Introduction Safety Symbols Precautions Refer all servicing to qualiﬁed service personnelLocation of the Caution Statements Do not open the cabinet or modify the unitTo disconnect the power cord, grasp the plug ﬁrmly and pull Handle the power cord with careNever touch the plug and power cord if it begins to thunder Place the unit at the strong and stable placeUse an easily accessible power outlet Periodically clean the area around the plugUnplug the unit before cleaning it Do not touch a damaged LCD panel directly with bare handsLCD Panel Features IntroductionCE210W CE240WPackage Contents Controls & Connectors FrontRear / Side / Bottom CE210W is given as an example Before Connecting Resolution Frequency Dot Clock RemarksCable Connection Analog Input CE210WConnecting the Signal Cable Digital InputSignal Cable Connector of the PC Analog InputCable Connection USB Cable Selecting the Active Input Connecting Two PCs to the MonitorConnecting Examples Priority setting Performance How to use the ScreenManager Making Adjustments and SettingsEntering the ScreenManager Exiting the ScreenManagerScreenManager Adjustments and Settings To select the ModeFineContrast Main menu Sub menu ReferenceColor Adjustment of the Mode Settings FineContrast ModeDetailed Adjustments Mode DescriptionUseful Functions Adjustment LockOff Timer Power Indicator Setting Eizo Logo Appearing FunctionTo undisplay To displayAdjustment Screen AdjustmentRun the Screen Adjustment Program Analog InputAdjust by using Screen menu in the ScreenManager Adjust the output signal range Dynamic Range of the signal ProcedureDisplaying Lower Resolutions Enlarge the screen size when displaying a low resolutionMode Function Smooth the blurred texts of the enlarged screenIcons Functions FineContrast Mode SRGB Custom Color AdjustmentAdjustment Items Menu Function Descriptions Adjustable range Power-save Setup Power Saving SystemMonitor Power Indicator Digital InputMaking USE of USB Universal Serial Bus Required system environmentConnecting Examples Attaching AN ARM Attach an arm stand to the LCD monitor securely100 Troubleshooting Problems Points to check with PossibleSolutionsSame image for extended periods of time Try executing the following method LCD Panel CleaningCabinet Specifications DVI-I×2CE240W Default settings Beeper settingsDimensions CE240W Pin No Signal Signal RemarksPin Assignment USB PortGlossary SRGBStandard RGB TemperatureTMDSTransition Minimized Differential Signaling APPENDIX/ANHANG/ANNEXE CE240W For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie Recycling Information for customers in USA