Insignia NS-55E480A13A, NS-46E480A13A manual To connect a DVD or Blu-ray player using DVI

NS-46E480A13A/NS-55E480A13A Insignia 46"/55" 1080p LED TV

Using DVI (same as HDMI but requires a sound connection)

Note

You must use the HDMI 1/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers.

To connect a DVD or Blu-ray player using DVI:

1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the DVD or Blu-ray player.

3Connect the other end of the cable to the HDMI 1/DVI jack on the side of your TV.

DVD or Blu-ray player

HDMI cable with HDMI-DVI adapter	audio cable
	3.5mm

Side of TV

4Connect a 3.5mm audio cable (not provided) to the PC/DVI AUDIO IN jack on the side your TV and to the AUDIO OUT jacks on the DVD or Blu-ray player.

5Plug your TV’s power cord into a power outlet, then turn on your TV.

6Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player.

7Press INPUT to open the Input Source list.

8Press S or T to select HDMI 1, then press

ENTER.

Note

You can also press HDMI one or more times to select the DVD or Blu-ray player.

Using component video (better)

To connect a DVD or Blu-ray player using component video:

1Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.

2Connect a component video cable (not provided) to the COMPONENT/AV Y/VIDEO, PB, and PR jacks on the back of your TV and to the COMPONENT OUT jacks on the component video device.

Cables are often color-coded to match color-coded jacks.

DVD or Blu-ray player

Y / VIDEO PB PR L R Audiocable videoComponentcable

Back of TV

3Connect an audio cable to the L and R audio jacks on the back of your TV and to the L/R AUDIO OUT jacks on the DVD or Blu-ray player.

Notes

•The COMPONENT/AV Y/VIDEO, PB, and PR video jacks (used to connect a component device) share the L and R audio jacks with the COMPONENT/AV Y/VIDEO jack (used to connect a composite device).

•When you connect the audio using the

L and R audio jacks, the audio output is analog.

4Plug your TV’s power cord into a power outlet, then turn on your TV.

5Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player.

6Press INPUT to open the Input Source list.

7Press S or T to select Component or AV, then press ENTER.

Note

You can also press VIDEO to select the DVD or Blu-ray player.

14 www.insigniaproducts.com