Insignia NS-46E480A13A Maintaining, Cleaning the TV cabinet, Video and audio, Problem Solution

Insignia 46"/55" 1080p LED TV

ENTER. The Photos · Photos · Settings menu	Troubleshooting
5 Press S or T to highlight Settings, then press

opens.
		PICTURE	AUDIO	CHANNELS SETTINGS	PHOTOS MHL/ACC
Photos • Photos • Settings
Repeat					On
Shuffle					Off
Speed					4 sec
Transition					None
MOVE	OK	SELECT	MENU	PREVIOUS	EXIT EXIT
	ENTER

Repeat the slideshow when it reaches the end.

6Press S or T to highlight an option, then press ENTER. You can select:

•Repeat—Repeats the slideshow when it reaches the end. You can select On or Off.

•Shuffle—Displays the slideshow photos in random order. You can select On or Off.

•Speed—Sets the amount of time a photo is displayed before the slideshow moves to the next photo. You can select 4 Sec, 6 Sec, or 8 Sec.

•Transition—Selects the way photos transition when moving to the next file in the slideshow. You can select:

•None—No transition effect.

•Fade to Black—Fades the screen to black between photos.

•Vertical Wipe—Wipes the screen from top to bottom between photos.

•Horizontal Wipe—Wipes the screen from left to right between photos.

•Random—Randomly selects a transition effect.

7Press EXIT to close the menu.

Maintaining

•Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.

•Storage temperatures are 32° to 122°F (0° to 50°C).

•Working temperatures are 41° to 104°F (5° to 40°C).

•Do not place your TV in direct sunlight or near a heat source.

Cleaning the TV cabinet

Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially dirty, moisten a soft, lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a clean cloth to dry the cabinet.

Warning

	Do not try to repair your TV yourself. Contact
	authorized service personnel.
Video and audio
Problem		Solution
Picture does not fill the		• Change the aspect ratio. An increasing amount
screen. There are black bars
		of digital TV and movies are presented in wide
around the picture.
		screen (16:9). See “Aspect ratio options” on
		page 26.
No picture (screen is not lit)		• Press	on the TV or the remote control.
and no sound.
		• Make sure that the Audio Only option is set to
		Off. See “Playing TV audio only” on page 28.
		• Make sure that the video cables are connected
		securely to your TV.
		• Adjust the contrast and brightness. See
		“Adjusting the TV picture” on page 25.
		• Make sure that the power cord is plugged in.
		• Make sure that the correct video input source is
		selected. See “Selecting the video input source”
		on page 23.
		• Try another channel. The station may be
		experiencing problems.
		• Make sure that the incoming signal is
		compatible.
		• Make sure that the antenna or cable TV is
		connected correctly and securely. See
		“Connecting a cable or satellite box” on page 10
		or “Connecting an antenna or cable TV (no box)”
		on page 13.
		• Check the closed caption settings. Some TEXT
		modes can block the screen.
Dark, poor, or no picture		• Try another channel. The station may be
(screen is lit), but sound is
		experiencing problems.
good.
		• Make sure that the antenna or cable TV is
		connected correctly and securely. See
		“Connecting a cable or satellite box” on page 10
		or “Connecting an antenna or cable TV (no box)”
		on page 13.
		• Adjust the brightness. See “Adjusting the TV
		picture” on page 25.
		• Make sure that the correct picture mode is
		selected. See “Adjusting the TV picture” on
		page 25.
		• If you are using an antenna, the digital channel
		signal may be low. To check the digital channel
		signal strength, see “Checking the digital signal
		strength” on page 31.
		• If you are using an antenna and the signal
		strength is low, adjust the antenna or use a
		highly directional outdoor antenna or set-top
		antenna with a built-in amplifier.
		• Make sure that the video cables are connected
		securely to your TV.
		• The video cable(s) you are using may be bad. Try
		a new set.
		• Try another channel. The station may be
		experiencing problems.

Cleaning the TV screen

Clean the screen with a soft, lint-free cloth.

www.insigniaproducts.com 49