Insignia NS-46E480A13A manual Installing the stand, Installing a wall-mount bracket, Model

Insignia 46"/55" 1080p LED TV

Installing the stand or wall-mount bracket

Notes

•If you plan to wall-mount your TV, do not install the stand.

•Store the stand and stand screws in case you decide to use the stand in the future.

Installing the stand

To install the stand:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Secure the base to the stand column with the four short screws (provided).

Model	Screw type	Screw length	# of screws
NS-46E480A13A	M4	12 mm	4
NS-55E480A13A	M6	12 mm	4

Installing a wall-mount bracket

Warning

This TV is intended to be supported by a UL Listed wall mount bracket with suitable weight/load. (See “Miscellaneous” on page 52.)

To attach your TV to a wall-mount bracket:

1Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches.

2Remove the four screws that secure the stand column to the TV screen, then remove the stand column.

3Secure the stand cover to the back of the TV screen using the four screws you just removed.

www.insigniaproducts.com 5