Insignia NS-55E480A13A Connecting power, Connecting a cable or satellite box, Using Hdmi best

NS-46E480A13A/NS-55E480A13A Insignia 46"/55" 1080p LED TV

Connecting power

To connect the power:

•Connect the AC power cord to the AC connector on the back of your TV, then plug the other end into a power outlet.

Cautions

•Your TV should only be operated from the power source indicated on the label.

•Always unplug the AC power cord from the power outlet when you will not be using your TV for an extended period of time.

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see “What connection should I use?” on page 9.

Using HDMI (best)

To connect a cable or satellite box using HDMI:

1Make sure that your TV’s power cord is unplugged, and all connected equipment is turned off.

2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.

3Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the cable or satellite box.

Cable or satellite box

HDMI cable

Side of TV

4Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.

5Go through the Setup Wizard on page 21.

Note

An HDMI cable carries both audio and video. You do not need to use any audio cables.

10 www.insigniaproducts.com