Zenith P42W34 manual External A/V Source Setup, How to connect, How to use, DVD Setup, DTV Setup

Installation

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

DC IN	ANT IN	AV(EXPANDED) INPUT			AV OUTPUT		REMOTE
(DC 12V)	+75 Ω						CONTROL	EXPANDED OUTPUT
			R AUDIO L (MONO) VIDEO	R AUDIO L		VIDEO

How to use

1.Use the INPUT SELECT button on the remote control to select Video (Exp.).

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

DVD Setup

How to connect

R AUDIO L VIDEO

Camcorder

Video Game Set

DC IN	ANT IN	AV(EXPANDED) INPUT		AV OUTPUT		REMOTE
(DC 12V)	+75 Ω					CONTROL	EXPANDED OUTPUT
		R AUDIO L (MONO) VIDEO	R AUDIO L		VIDEO

1.Connect the DVD video outputs to the COMPONENT INPUT jacks (Y, PB, PR) and connect the DVD audio outputs to the AUDIO INPUT jacks.

2.If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks.

		R AUDIO L	Y	PB	PR				R AUDIO L (MONO)
RGB OUTPUT	EXPANDED	AUDIO INPUT	COMPONENT INPUT			REMOTE	S-VIDEO	VIDEO	AUDIO INPUT
	INPUT					CONTROL		INPUT

How to use

1.Turn on the DVD player, insert a DVD.

2.Use the INPUT SELECT button on the remote control to select Component. (If connected to S-VIDEO, select the S-Videoexternal input source.)

3.Refer to the DVD player's manual for operating instructions.

•Component Input ports

To get better picture quality, connect a DVD player to the com- ponent input ports as shown below.

(R) AUDIO (L) B R

or

(R) AUDIO (L) S-VIDEO

The TV Component Ports	Y	PB	PR
DVD Player Video	Y	Pb	Pr
	Y	B-Y	R-Y
Output Ports	Y	Cb	Cr
	Y	PB	PR

DVD

DTV Setup

DC IN	ANT IN	AV(EXPANDED) INPUT		AV OUTPUT		REMOTE
(DC 12V)	+75 Ω					CONTROL	EXPANDED OUTPUT
		R AUDIO L (MONO) VIDEO	R AUDIO L		VIDEO

- To watch digitally broadcast programs, pur- chase and connect a digital set-top box.

-This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for DTV (480p,720p,1080i) modes.

How to connect

1.Use the TV’s COMPONENT (Y, PB, PR) INPUT, RGB, or DVI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections.

How to use

1.Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

2.Use INPUT SELECT on the remote control to select Component, RGB or DVI.

R AUDIO L

Y

PB

PR

R AUDIO L (MONO)

DVI INPUT

RGB INPUT

AUDIO INPUT

RGB OUTPUT

EXPANDED

AUDIO INPUT

COMPONENT INPUT

REMOTE

S-VIDEO

VIDEO

AUDIO INPUT

INPUT

CONTROL

INPUT

or or

DVI-DTV OUTPUT (R) AUDIO (L) DTV OUTPUT (R) AUDIO (L) (R) AUDIO (L) B R

Digital Set-top box

14 Plasma TV