Operation
Adjusting Horizontal/ Vertical Position
- This function works in the following mode:
1.Press the MENU button and then use D / E button to select the SCREEN menu.
2.Press the G button and then use D / E button to select Position.
3.Press the G button and then use D / E / F / Gbutton to adjust the position.
4.Press the ENTER button to save.
SCREEN
Auto config.
ARC
Zoom in/out
Position G
Manual config. Screen adj. Reset
VGA Mode
MENU Prev.
D
F E G 
Manual Configure (RGB-PC mode only)
-If the image still isn’t clear after auto adjustment and especially if characters are still jittery, adjust the picture Phase manually.
-To correct the screen size, adjust Clock.
1. | Press the MENU button and then use D / E button to select the SCREEN menu. |
| SCREEN |
|
| |
|
|
| ||||
2. | Press the G button and then use D / E button to select Manual config.. |
|
| Auto config. |
|
|
|
|
|
| |||
|
|
|
| ARC |
|
|
3. | Press the G button and then use D / E button to to select Phase or Clock. |
|
|
| ||
| Zoom in/out |
|
| |||
4. | Use the F / G button to make appropriate adjustments. |
|
|
|
| |
|
| Position |
|
| ||
|
|
|
|
|
| |
| • The Phase adjustment range is 0 ~ 31. |
|
| Manual config. G Phase | 0 | |
|
| Screen adj. |
|
| ||
| • The Clock adjustment range is |
| Clock | 0 | ||
|
|
| ||||
|
| Reset |
|
| ||
5. | Press the ENTER button to save. |
|
| VGA Mode |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MENU Prev. |
|
|
|
|
|
|
|
|
|
Screen Adjustments (TV, Video(Exp.), Video,
- Use this function to correct jittering or picture instability while viewing a video tape.
1.Press the MENU button and then use D / E button to select the SCREEN menu.
2.Press the G button and then use D / E button to select Screen adj..
3.Press the G button and then use D / E button to select TV or VCR.
•Select the VCR option if watching a VCR.
•Select the TV option for other equipment. (Except VCR)
4.Press the ENTER button to save.
SCREEN
Auto config.
ARC
Zoom in/out Position Manual config.
Screen adj. G
Reset
YNR
TV
VCR
MENU Prev.
Initializing (Reset to original factory value)
-This function operates in every mode.
-Use the Reset option to initialize the adjusted settings.
1.Press the MENU button and then use D / E button to select the SCREEN menu.
2.Press the G button and then use D / E button to select Reset.
3.Press the G button.
•You can initialize Zoom in/out, Manual config., Position, Split zoom, PIP size, PIP position and sub picture size for double window.
SCREEN
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset | G | To set |
YNR
MENU Prev.
Owner’s Manual 27