Operation
Operation
Turning on the TV
Turning on the TV just after installation 
1.Connect power cord correctly.
2.Press the 
ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the INPUT SELECT, D / E button on the TV or press the POWER, INPUT SELECT, MULTIMEDIA, CH (D / E), FAV CH, Number button on the remote control to switch the TV on.
Turning on the TV (power cord is still connected)
1. If the TV was turned off with the 
ON/OFF button on the TV
• Press the 
ON/OFF button on the TV to turn the TV on.
2.If the TV was turned off with the remote control and the 
ON/OFF button on the TV
•Press the 
ON/OFF button on the TV and then press the INPUT SELECT button on the TV. Or, on the remote control, press either POWER, INPUT SELECT, MULTIMEDIA, CH (D / E), FAV CH, Number to turn the TV on.
•CAUTION
If you connect or disconnect the Tuner Box cable to the TV, the TV is switched to standby mode.
Menu Language Selection
-The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use D / E button to select the SPECIAL menu. 2. Press the G button and then use D / E button to select Language.
3. Press the G button and then use D / E button to select your desired language. From this point on, the
4. Press the MENU button to save.
SPECIALI
Language G
Key lock ISM Method Low power Set ID Caption / Text Captions OSD Rotate
MENU Prev.
English
Españ ol
Franç ais
Owner’s Manual 17