Zenith P42W34 Screen Menu Options, Auto Adjustment, Setting Picture Format, Picture Size Zoom

Operation

Screen Menu Options

Auto Adjustment

-RGB (PC) mode only; This function doesn’t work for RGB-DTV mode.

-Automatically adjusts picture position and minimizes image shaking.

-After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.

-Auto config. and Manual config. are not active in DVI mode.

1.	Press the MENU button and then use D / E button to select the SCREEN menu.
		SCREEN
2.	Press the G button and then use D / E button to select Auto config..		To set
		Auto config. G
3.	Press the G button to run Auto configure.	ARC
		Zoom in/out
	• When Auto config. has finished, OK will be shown on screen.	Position
	• If the position of the image is still not correct, try Auto adjustment again.	Manual config.
4.	In RGB (PC) mode, if the image needs to be adjusted more after using Auto config.,	Screen adj.
		Reset
	you can make further adjustments with the Manual config. option.	VGA Mode
		MENU Prev.

Setting Picture Format

-Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.

-Set every aspect ratio for RGB 480p, DVI 480p, Component 480i/480p, Video, and S-Video sources.

-Use 4:3, or 16:9 for other input sources.

1. Press the ARC button repeatedly to select the desired picture format. You can also adjust ARC in the SCREEN menu.

•4:3

-Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.

•16:9

- Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.

•Horizon

-Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view.

•Zoom

-Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Picture Size Zoom

- When enlarging or reducing the picture, the image may become distorted.

1.Use ZOOM+/ZOOM- button to enlarge or reduce the picture size.

•Zoom adjustment range is 100~300.

2.Adjust the main picture position using the D / E / F / G buttons while in enlarged picture mode.

Zoom out

100%

D

F E G

26 Plasma TV