StarTech.com RACKCONS1708, RKCONS1916GB, RACKCONS1716 manual Auto Scan, Manual Scan, Audio Stick

Page 19

Auto Scan

In this mode, the Console automatically switches from one powered computer to the next, sequentially in a fixed interval. During Auto Scan mode, the OSD displays the name of the selected computer. When Auto Scan detects any keyboard or mouse activity, it suspends the scanning until activity stops; it then resumes with the next computer in sequence. To abort Auto Scan mode, press the left <CTRL> twice, or, press any front button. Scan Type and Scan Rate set the scan pattern. Scan Type (<F4>:More\ Scan Type) determines if scanned computers must also be eye mark selected. Scan Rate (<F4>:More\Scan Rate) sets the display interval when a computer is selected before selecting the next one.

Manual Scan

Scan through power-on computers one by one by keyboard control.Scan Type (<F4>:More\Scan Type) determines if scanned computers must also be eye mark selected. Press the up arrow key to select the previous computer and the down arrow key to select the next computer. Press any other key to abort Manual Scan mode.

Audio Stick

An optional multimedia module can be linked to the back of each KVM Module for selecting microphone and stereo speaker signals. There are two options for Audio Stick: On and Off. When set to On, audio selection follows computer selection.

When

set to

Off, audio selection

stops following

computer

selection.

It is

useful if you want to listen to a particular computer’s audio signal

while

operating

other computers.

The non-volatile

memory

stores the

Audio Stick setting.

Instruction Manual

16

Image 19
Contents 1U 17 & 19 Rackmount LCD Console with 8 & 16 Port KVM Switch FCC Compliance Statement Table of Contents Introduction Packaging ContentsHardware Guide Installation and UsageMounting the Console Rail Lock Switch Page Connecting the Console/Module Page Cascade Configuration Connecting computers to the moduleTurning on the console Configuring display settingsPanel controls and OSD functions Testing the consoleAuto tune Color Input SourceBrightness ContrastPosition Color Cont’dLanguage Recall Module OperationPush Button Selection Editing Computer Name Assignments Locking Devices Slave or computer Selecting Computers for AutoscanAdvanced Functions Manual Scan Auto ScanAudio Stick Scan Rate Scan TypeHot-key commands Command Change Configuration while Running Display Size SpecificationsKeyboard Limitation of Liability Technical Support Warranty Information