StarTech.com RACKCONS1708, RKCONS1916GB, RACKCONS1716, RKCONS1708EU Connecting the Console/Module

Page 9

Connecting the Console/Module

To connect the KVM Console/Module to a computer, perform the following steps:

1.Remove the four screws from both sides of the KVM console. Be sure to retain these screws for the next installation step.

2.Attach the mounting brackets to both sides of the KVM console, using the screws removed in step 1.

Instruction Manual

6

Image 9

Contents 1U 17 & 19 Rackmount LCD Console with 8 & 16 Port KVM Switch FCC Compliance Statement Table of Contents Introduction Packaging ContentsHardware Guide Installation and UsageMounting the Console Rail Lock Switch Page Connecting the Console/Module Page Cascade Configuration Connecting computers to the moduleTurning on the console Configuring display settingsTesting the console Panel controls and OSD functionsAuto tune Brightness Input SourceContrast ColorColor Cont’d PositionLanguage Module Operation RecallPush Button Selection Editing Computer Name Assignments Selecting Computers for Autoscan Locking Devices Slave or computerAdvanced Functions Auto Scan Manual ScanAudio Stick Scan Rate Scan TypeHot-key commands Command Change Configuration while Running Display Size SpecificationsKeyboard Limitation of Liability Technical Support Warranty Information