StarTech.com RKCONS1708GB, RKCONS1916GB, RACKCONS1716, RKCONS1708EU, RKCONS1908GB Rail Lock Switch

Page 7

3. Tighten the screws that were loosened in Step 1:

4.Install the remaining rail, repeating Steps 1-3.

5.Slide the Module onto the Console side rails, connecting the Module and Console using the male Centronics connector provided by the Console, and the female Centronics connector provided by the Module. Ensure the connection is secure, and that the module is firmly seated within the Console side rails.

6.Gently, but firmly insert the Console (with Module attached) into the left and right rails:

7.Unlock the console, and pull the left and right rail-lock switches towards you simultaneously, and hold them in this position while pushing the console into the cabinet:

Rail Lock Switch

Instruction Manual

4

Image 7

Contents 1U 17 & 19 Rackmount LCD Console with 8 & 16 Port KVM Switch FCC Compliance Statement Table of Contents Introduction Packaging ContentsHardware Guide Installation and UsageMounting the Console Rail Lock Switch Page Connecting the Console/Module Page Cascade Configuration Connecting computers to the moduleTurning on the console Configuring display settingsPanel controls and OSD functions Testing the consoleAuto tune Color Input SourceBrightness ContrastPosition Color Cont’dLanguage Recall Module OperationPush Button Selection Editing Computer Name Assignments Locking Devices Slave or computer Selecting Computers for AutoscanAdvanced Functions Manual Scan Auto ScanAudio Stick Scan Rate Scan TypeHot-key commands Command Change Configuration while Running Display Size SpecificationsKeyboard Limitation of Liability Technical Support Warranty Information