Change Configuration while Running

		Use the up and down arrow keys to
Manual Scan	Left Ctrl + Left Ctrl	scroll to the previous or next computer
Manual Scan	+ F2	in the sequence. Press any other key to
	+ F2	in the sequence. Press any other key to
		abort manual scan.
		Scrolls between the different typematic
		rates. This setting overrides that of
Adjust keyboard	Left Ctrl + Left Ctrl	the BIOS and the operating system.
Adjust keyboard	Left Ctrl + Left Ctrl	The console will generate one to four
typematic rate	+ F4	The console will generate one to four
typematic rate	+ F4	beeps, corresponding to 10, 15, 20,
		beeps, corresponding to 10, 15, 20,
		and 30 characters/sec respectively, to
		signify the typematic rate.

A device (a computer or a KVM switch) at any ‘PC x’ port can be changed at anytime after initial power-up. If you change any one of the PC 1 to PC 8 ports connection from a computer to a Slave or vice versa, or replace the devices of a port, the OSD will update this change the next time it is activated.

Please Note: Any new device must be turned off before it is connected to the Master.

Instruction Manual