SECO-LARM USA SK-910RC4Q manual Table of Contents, Introduction, Specifications, Dimensions

ENFORCER SK-910RC4Q Central Receiver

Table of Contents:

Introduction	2	Alert Tones	4
Specifications	2	Programming Each Channel Output	5
Dimensions	2	Setting the Timed Output	6
Overview	3	Setting the Auxiliary Relay	6
Installation Notes	3	Setting the Power LED	7
Code Learning a New Transmitter	4	Sample Applications	7
Displaying or Clearing a Channel’s Memory ..	4	Troubleshooting	8

Introduction:

The SK-910RC4Q Central Receiver is a four-channel receiver with four independently controlled output modes and a unique volume-adjustable alert tone for each channel. This RF receiver is compatible with all ENFORCER transmitters, both code hopping and fixed code. The receiver can be used to remotely control a variety of home automation devices, such as garage door openers, lights, motorized gates, lifts, and other devices.

Specifications:

Operating voltage		12VDC
	Standby	15mA@12VDC
	1 Relay active	85mA@12VDC
	2 Relays active	140mA@12VDC
Current	3 Relays active	210mA@12VDC
draw	4 Relays active	260mA@12VDC
	All relays active	330mA@12VDC
	All relays +	450mA@12VDC
	sound
DC power supply		500mA@12VDC
		(included)
Relay type		Form C (NO/NC/COM)
Channels 1~4 relay rating		10A@12VDC
Auxiliary relay rating		3A max.1

1Included power supply will not support loads larger than 500mA. For larger loads, replace with appropriate DC power supply.

RF frequency	315MHz
# of RF channels	4
Alert sound	100 +/- 3dB@10cm
	adjustable
Number of alert tones	4, programmable
	14-Pin terminal block,
Connectors	3 pins per relay,
	2-pin auxiliary output
Dimensions	55/16”x 33/16”x1”
	(135x83x26 mm)
Operating temperature	-40°~167° F
	(-40°~75° C)
Range	Up to 500’ (152m)2

2Actual range will vary greatly depending on the operating environment.

Dimensions:		1”
	4”	(26mm)
Front:		Bottom:
	(100mm)

41/8” 33/16”

(105mm) (83mm)

55/16”

(135mm)

2 SECO-LARM U.S.A., Inc.