ENFORCER SK-910RC4Q Central Receiver
Troubleshooting:
The SK-910RC4Q will not read a transmitter it has already learned.
Check that the transmitter is operating within the receiver’s range.
Check number of transmitters learned. Learning more than 15 will cause the first transmitter learned to be deleted. Check that there are transmitter codes stored on the channel by pressing that channel’s programming button once and counting the flashes.
The SK-910RC4Q is not in the correct relay output mode.
Programming modes change starting from the current mode. For example, press the programming button 3 times to go from Toggle Output to Timed Output. If necessary, please review Programming Channel Output on page 5.
Also Available from SECO-LARM:
Single-Button Transmitter | LED Strobe Light | Wired RF Transmitter |
SK-919TD1S-UP | SL-1301-BAQ Series | SK-919TDWS-BU |
Desktop Transmitter | Dual Photobeam Sensor | Electric Door Strikes |
SK-919TP2D-P | E-960-D90Q | SK-990AQ |
| |
| | |
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of SECO-LARM.
SECO-LARM®U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606 | Website: www.seco-larm.com | PITSW1 |
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326 | E-mail: sales@seco-larm.com | MiSK-910RC4Q_1007.docx |
Order Part# 762-508-1% |
