Connecting the Units
When Connecting the Head Unit
When Using a Display Connected Rear Video Output
This product’s rear video output is for connection of a display to enable passengers in the rear seats to watch the DVD or Video CD.
Connecting the Power Cord
<ENGLISH>
Connection box (supplied with the DVD Navigation Unit)
Green
3 m
DVD Navigation Unit (e.g.
To audio outputs
WARNING
•NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while Driving.
This product
This Product
Connection method
1. Clamp the parking brake switch power supply side lead.
2. Clamp firmly with
To video output
RCA cables (supplied) 
RCA cables (sold separately)
Yellow (REAR
VIDEO OUTPUT)16 cm
Note:
•The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.
Light green
20 pin cable (supplied)
6 m
Red
(sold separately)
16 cm 
16 cm
White (audio output (Left))
Red (audio output (Right))
White (audio output (Left))
(REAR OUTPUT)
Red (audio output (Right))
(REAR OUTPUT)
Yellow (rear video output)
(REAR VIDEO OUTPUT)
16 cm
16 cm
16 cm
Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.
Parking brake switch |
Blue | Blue |
Red
RCA cable (supplied)
Yellow (AVM output)
(AVM OUTPUT)
Yellow (video input)
16 cm
16 cm
Power supply side |
Ground side |
This product
16 cm
RCA cable (sold separately)
6 m 
(VIDEO INPUT)
Red
To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
Fuse resistor
Yellow | Voice guidance speaker | |
(VIDEO INPUT) | ||
(supplied) | ||
|
Not used.
40 cm
3 m
40 cm | Blue |
|
Head Unit (sold separately)
To video input |
|
|
|
|
|
|
|
|
|
|
|
|
| To audio inputs |
|
|
|
|
|
Display with RCA input jacks
Yellow
To terminal always supplied with power regardless of ignition switch position.
Black (ground)
To vehicle (metal) body.
Fuse holder
Fig. 3 | Fig. 4 | Fig. 5 |