Pioneer AVH-P4100DVD operation manual Resetting the microprocessor

Section
02		Before You Start
	When an operation is		Feature demo mode
	prohibited		The feature demo automatically starts when
	When you are watching a DVD and attempt to		you select the source Off. The demo continues
			while the ignition switch is set to ACC or ON.
	perform an operation, it may not be performed
			To cancel the feature demo, press and hold
	because of the programming on the disc.
			MUTE. To restart the feature demo, press and
	When this happens, the icon appears on
			hold MUTE again. Remember that if the fea-
	the screen.
			ture demo continues operating when the car
!		The icon may not appear with certain

discs.	engine is turned off, it may drain battery
	power.
Resetting the microprocessor	Important

Pressing RESET lets you reset the micropro-

The red lead (ACC) of this unit should be con- nected to a terminal coupled with ignition switch

cessor to its initial settings without changing

the bookmark information.

on/off operations. If this is not done, the vehicle battery may be drained.

The microprocessor must be reset under the following conditions:

!Prior to using this unit for the first time after installation

!If the unit fails to operate properly

!When strange or incorrect messages ap- pear on the display

1Turn the ignition switch OFF.

2Press RESET with a pen tip or other pointed instrument.

RESET button

Note

After completing connections or when you want to erase all memorized settings or return the unit to its initial (factory) settings, switch your engine ON or set the ignition switch to ACC ON before pressing RESET.

10 En