| Section |
Entertainment settings | 17 |
|
|
Introduction of entertainment settings
1
1Entertainment menu display
Shows the entertainment function names.
1Touch AV Menu and then touch Entertainment Menu to display the enter- tainment function names.
The entertainment function names are dis- played and operable ones are highlighted.
2Touch ESC to return to the display of
each source.
# To return to the previous display, touch Back.
Selecting the background display
You can switch background displays while lis- tening to each source.
1Touch Background on the entertain- ment menu.
!AV Input – Video image from the external video unit that is connected to this unit
#When the AV (AV input) is not set to Video, AV Input cannot be selected. (Refer to page 53.)
#If no JPEG image has been stored in this unit, you cannot select Photo. To store JPEG image in
this unit, see the following section. Refer to Cap- ture an image in JPEG files on page 34.
Selecting the illumination color
This unit is equipped with multiple-color illu- mination.
Direct selection from preset illumination color
You can select an illumination color from the color list.
1Touch Illumination Color on the enter- tainment menu.
2Touch one of the color list.
You can select one from the following list.
!Blue (blue)
!Red (red)
!Amber (amber)
!Green (green)
!White (white)
!Scan (scanning all colors)
Notes
!Scan setting cycles continuously through all
Entertainment settings
2 Touch the desired setting.
You can select one from the following list.
!BGP1 – Background picture 1
!BGP2 – Background picture 2
!BGP3 – Background picture 3
!BGP4 – Background picture 4
!BGV1 – Background visual 1
!BGV2 – Background visual 2
!BGV3 – Background visual 3
!Photo – JPEG image stored in this unit
the colors.
!While scanning all colors, touching Scan can stop the scanning. When this is done, you can select the displayed color as the background.
Customizing the illumination color
1Touch Illumination Color on the enter- tainment menu.
En 55