| Section |
Audio Adjustments | 13 |
|
|
Custom Custom
Flat Flat
Super Bass Super bass
#Custom is an adjusted equalizer curve that you create. If you make adjustments to an equali- zer curve, the equalizer curve setting is memor- ized in Custom.
#When Flat is selected, no supplement or cor- rection is made to the sound. This is useful to check the effect of the equalizer curves by switch- ing alternatively between Flat and a set equalizer curve.
3Touch c or d on Band to select the equalizer band to adjust.
Low
4Touch c or d on Frequency to select the frequency to adjust.
Low:
Mid:
High:
5Touch c or d on Q.Factor to select the Q factor.
6Touch a or b to adjust the level of the equalizer band.
+12 to
creased or decreased.
# You can then select another band and adjust the level.
Using subwoofer output
This unit is equipped with a subwoofer output which can be turned on or off.
!When the subwoofer output is on, you can adjust the
1Touch Subwoofer on the audio function menu.
2Touch dnext to Subwoofer to turn sub-
woofer output on.
# To turn subwoofer output off, touch c.
3Touch c or d next to Phase to select the phase of subwoofer output.
Touch d to select normal phase and Normal appears in the display. Touch c to select re- verse phase and Reverse appears in the dis- play.
4Touch c or d next to Level to adjust the output level of the subwoofer.
+6 to
5Touch c or d next to Frequency to se- lect
Each time you touch cor d selects
Only frequencies lower than those in the se-
lected range are outputted from the sub- woofer.
Audio Adjustments
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1Touch Loudness on the audio function menu.
2Touch d to turn loudness on.
#To turn loudness off, touch c.
3Touch c or d to select a desired level. Low
Boosting the bass
Bass boost function boosts the bass level of sound.
1Touch Bass Booster on the audio func- tion menu.
2Touch c or d to select a desired level.
0to +6 is displayed as the level is increased or decreased.
En 43