Pioneer AVH-P4100DVD operation manual Resetting the audio functions, Correcting distorted sound

	Section
Initial Settings	15

1Touch PIN Code Input on the initial menu.

PIN code input display appears.

2Touch 0 to 9 to input the PIN code of

your Bluetooth audio player.

# To cancel the inputted numbers, touch C.

3After inputting PIN code (up to 16 di- gits), touch .

The PIN code you entered is stored in this sys- tem.

Please see the following section for Auto TA and EQ operation. Refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 90

Resetting the audio functions

You can reset all audio functions except vo- lume.

!Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function.

Initial Settings

Correcting distorted sound

You can minimize distortion that may be caused by the equalizer curve settings. Setting an equalizer level high can cause dis- tortion. If high sound is crippled or distorted, try switching to Low. Normally, leave the set- ting at High to ensure quality sound.

!Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function.

%Touch Digital ATT on the initial menu to switch the digital attenuator setting. Touch Digital ATT repeatedly until the desired setting appears in the display.

!High – High quality sound

!Low – Minimize distortion sound

1Touch Audio Reset on the initial menu.

2Touch Reset.

3Touch Reset again to reset audio func-

tions.

# To cancel resetting the audio functions, touch Cancel.

Auto TA and EQ (auto-time alignment and auto- equalizing)

The auto-time alignment is automatically ad- justed for the distance between each speaker and the listening position.

The auto-equalizer automatically measures the car interior acoustic characteristics, and then creates the auto-equalizer curve based on that information.

!Only when the multi-channel processor (DEQ-P8000) is connected to this unit, you can operate this function.

En 51