Surround sound and other settings | 09 |
•LS – Left surround speaker
•SW – Subwoofer
3Use the VOLUME +/– button to adjust the volume to an appropriate level.
Turn down the volume to
4 Use the (cursor up/down) buttons to adjust the speaker levels in turn.
You should hear the test tone at the same volume from each speaker when seated in the main listening position. The channel level range is ± 10 dB.
5When you’re done, press ENTER to exit test tone setup.
•The speaker volume can be adjusted while listening to any sound source you want by
pressing CH LEVEL (SHIFT + 5) and then
using the (cursor up/down) buttons to adjust the channel levels. After you’re finished with one channel, use the (cursor left/right) buttons to move to the next.
•When the AUTO listening mode is selected, using the test tone method will adjust levels for multichannel sources only. Use CH LEVEL (SHIFT + 5) and the
(cursor up/down) buttons (see tip above) to set levels for the AUTO listening mode with two channel sources.
•Since the subwoofer produces
61
En