04Getting started
2 Press OPEN/CLOSE to open the disc tray.
3 Load a disc.
Load a disc with the label side facing up in the
Disc number
If you want to load more discs, press DISC SKIP (remote or front panel) to rotate the disc tray. You can load up to five discs at once.
•Do not place discs in the two partially accessible disc spaces, as it easy to misalign them. Use only the
•Do not load more than one disc in a space.
•Before loading or removing discs, always wait for the disc mechanism to come to a complete stop.
•Do not rotate the disc tray by hand. Always use the DISC SKIP button.
•Sometimes, when the disc tray mechanism is moving, the controls are inoperative.
4 Press (remote) or (front panel) to start playback of the disc loaded in the
Alternatively, use the DVD/CD or DISC buttons on the remote, or the DIRECT PLAY buttons on the front panel to start playback of other discs.
If you’re playing a DVD or Video CD, a menu may appear. See
If you’re playing an MP3, WMA or JPEG disc, it may take a few seconds before playback starts, depending on the complexity of the file structure on the disc.
If you loaded a
•See also Options on page 65 if the disc contains both WMA/MP3 audio files and JPEG picture files.
5Use the VOLUME +/– button (or the front panel VOLUME knob) to adjust the volume.
Basic playback controls
The following table shows the basic controls on the remote for playing discs. You can find other playback features in Playing discs on page 43.
ENTER
FOLDER | FOLDER |
ENTER
30
En