DEH-2130R,2100R

1. This product

Note:

Depending on the kind of vehicle, the func- 2. Rear output tion of 3* and 5* may be different. If this is the case, be sure to connect 2* to 5* and 4* to

1*		3. Antenna jack
3*	2*
5*	4*	6. Connect leads of the same
5*	4*	color to each other.
7. Cap (1*)
When not using this terminal,
do not remove the cap.

4. Fuse

17. Fuse resistor

16. Power amp

(sold separately) 15. Connecting cords with

RCA pin plugs (sold separately)

18.Yellow/black

If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.

20. Blue/white

To system control terminal of the power amp. (Max. 300 mA 12 V DC.)

8. Yellow (3*)	9. Yellow (2*)
Back-up	To terminal always supplied
(or accessory)	with power regardless of
	ignition switch position.
10. Red (5*)	11. Red (4*)
Accessory	To electric terminal con-
(or back-up)	trolled by ignition switch
	(12 V DC) ON/OFF.

19. Fuse holder

25. Rear speaker

≠

22. Blue/white (6*)	23. Blue/white (7*)
	To Auto-antenna relay control terminal.
	(Max. 300 mA 12 V DC.)

21.System remote control

25.Rear speaker

≠

26.Perform these connections when using a different amp (sold separately).

12.Black (ground)

To vehicle (metal) body.

13.ISO connector

Note:

In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors.

14. Speaker leads

White	: Front left +
White/black	: Front left ≠
Gray	: Front right +
Gray/black	: Front right ≠
Green	: Rear left +
Green/black	: Rear left ≠
Violet	: Rear right +
Violet/black	: Rear right ≠

24.

The pin position of the ISO connector will differ depends on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type. In another type of vehicle, never connect 6* and 7*.

: Rear right ≠