-Removing the Upper Frame
1.Remove six Springs A, two Springs B and four Screws.
2.Remove two Tabs situated on rear side of the Upper Frame, remove two Arms on the front side, then remove two Tabs on the front side.
A
A
A
B
Arm
Arm
DEH-2130R,2100R
Upper Frame
A
A
B A
-Removing the Carriage Mechanism
1.Disengage the Carriage Mechanism from the two dampers situated in the front side by driving it up, then disengage and remove the mechanism from the one damper by driving it up aslant into front side direction.
Note : When assembling the Carriage Mechanism, coat the dampers with alcohol prior to the assembly.
- Removing the Clamp Arm Assy | A |
1.Remove a Spring A, a B and a Spring C.
2.Drive the Clamp Arm Assy up into rear side direction, then disengage the arm from its current position Finally, drive the assembly approximately 45 degrees upward, then slide the assembly toward right side to remove it.
Carriage Mechanism Section
Clamp Arm Assy Section
B
C
49