Pioneer AVH-P6850DVD Displaying the AVG-VDP1 Pioneer Vehicle Dynamics Processor, 100 En

Black plate (100,1)

Section

21 Other Functions

Adjusting the response positions of the touch panels (Touch Panel Calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response po- sitions of the touch panel. There are two ad- justment methods: 4-point adjustment, in which you touch four corners of the screen; and 16-point adjustment, in which you make fine-adjustments on the entire screen.

!Make sure to use the supplied pen for ad- justment, and gently touch the screen. If you press the touch panel forcefully, the touch panel may be damaged. Do not use a sharp pointed tool such as ballpoint pen or a mechanical pen. Otherwise the screen is damaged.

1Touch the source icon and then touch OFF to turn this unit off.

# When the source icon is not displayed, you can display it by touching the screen.

2Press and hold BAND/ESC.

The 4-point touch panel adjustment screen ap- pears.

3Touch each of the arrows on the four corners of the screen with the touch panel adjustment pen.

Arrows you touch turn red.

# If the arrows are not turned red, the 4-point ad- justment cannot be complete. Touch each arrow for adjustment and complete, or cancel the ad- justment to return to the OFF display.

# To cancel the adjustment, press V.ADJ.

4Press BAND/ESC to complete the 4- point adjustment.

The adjusted position data is saved.

!Do not turn off the engine while saving the adjusted position data.

100 En

5Press BAND/ESC to proceed to the 16- point adjustment.

The 16-point touch panel adjustment screen appears.

# To cancel the adjustment, press V.ADJ.

6Gently touch the center of the + mark displayed on the screen with the touch panel adjustment pen.

After you touch all the marks, the adjusted po- sition data is saved.

!Do not turn off the engine while saving the adjusted position data.

7To complete the adjustment, press V.ADJ.

# To restart the 16-point adjustment, press BAND/ESC.

Note

If touch panel adjustment cannot be performed properly, consult your local Pioneer dealer.

Displaying the AVG-VDP1

(Pioneer Vehicle Dynamics

Processor)

This unit can be used as the display unit for the AVG-VDP1 (sold separately) product.

!You can operate this function only when a Pioneer Vehicle Dynamics Processor (AVG- VDP1) is connected to this unit.

%Press V.ADJ to switch the display to the AVG-VDP1.

# To return to the video of sources, press V.ADJ again.

<CRB2163-B>100