Basic Operations
English
Equalizer
The Equalizer function applies preset sound effects to the unit’s audio output signal. Turn the volume knob to select from the following equalizer options: Off - Flat - Pop - Classicial - Rock.
With the equalizer function activated, if bass or treble is adjusted, the EQ Mode will revert to “Off”. When the equalizer function is activated, the most recently selected bass/treble levels cannot be adjusted. When the equalizer function is not active, the unit will return to the most recently selected bass and treble levels.
Loud set
When listening to music at low volumes, this feature will selectively boost certain bass and treble frequencies.
Rotate the volume knob to choose loud on or off.
Beep set
The beep tone feature allows the selection of an audible beep tone to be heard each time the menu is accessed.
Rotate volume knob to choose button beep sound on or off.
12/24 Mode
12 HOURS MODE: the clock displays in the type of 12 hours such as 11:18 AM.
24 HOURS MODE: the clock displays in the type of 24 hours such as 20:18.
Mirror image
DX/Local
When local seeking is on, only those radio stations with strong radio signal could be played.
Rotate volume knob to choose radio seeking local or distant.
Bass Freq
Rotate volume knob to choose the bass frequency: 60Hz, 80Hz, 100Hz, 200Hz.
Treble Freq
Rotate volume knob to choose the treble frequency: 10KHz, 12.5KHz, 15KHz, 17.5KHz.
This option allows for selection of a mirror image view when a rear view backup camera (sold separately) is connected to the CAMERA IN input on the back of the radio. Turn volume encoder to select “On” or “Off”.
Vol mode
Rotate knob to choose VOL LAST, the
Rotate knob to choose VOL ADJ, then rotate the knob to set the
A - VOL
After selecting “Adjust” for Vol Mode, rotate the knob to select the desired
SUB LPF
Rotate volume knob to choose the frequency of low pass filter: Off, 80Hz, 120Hz, 160Hz.
14 | VZ309 |