4. Cautions on Installation
1.Prepare all articles necessary for installing the source unit before starting.
2.Install the unit within 30° of the horizontal plane. (Figure 2)
3.If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand.
4.Use the enclosed screws for installation. Using other screws can cause damage. (Figure 3)
English
5. Installing the Source Unit
1.Place the mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 4.
2.Wire as shown in Section 8. .
3.Insert the source unit into the mounting bracket until it locks.
4.Take care of the top and bottom of the outer escutcheon and mount it so that all the hooks are locked.
Notes:
1)Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details.
2)Fasten the front stopper securely to prevent the source unit from coming loose.
• Console opening dimensions
(18 mm)
|
|
|
|
|
|
|
|
Hole |
|
|
| 53mm | |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VZ309 | 31 |