HD Radio Operations
HD Radio multicast channels
To tune to an HD Radio multicast channel, tune to the main signal and then press the [OPT] button on the control panel.
A list of multicast channels will be displayed
•Use the rotary encoder to navigate the list and then press to select a multicast channel.
•Use the remote control arrow keys and [ENT] enter button to select a multicast channel. Press and hold the [OPT] button to change between “Auto”, “Digital” and “Analog”.
When set to “AUTO”:
The station will be received first in Analog. but will change to Digital, when a digital signal is detected.
The HD icon will illuminate.
If the digital signal becomes unavailable, the unit will revert to Analog reception.
Preview scan
Press the [AS] button to scan and play all strong stations for 5 seconds each. Press [AS] again to stop scanning and play the current station.
Automatic store
Press and hold the [AS] button to select six strong stations and store them in the current band using the Auto Store feature.
After entering the stations into memory,
the unit will automatically stop at each station for five seconds, allowing you to preview each selection. When using the Auto Store feature, the new stations replace any stations already stored in preset memory.
Press the [AS] button again to stop the Auto Store function at any time.
English
HD Radio program information
To view the Program Type categories, when listening to HD Radio broadcasting,
press and hold Volume knob on the front panel. Program type categories are listed, allowing listeners to find similar programming by genre. Rotate the knob to change the category.
Press the rotary button to select Program category. The radio will start scanning for stations broadcasting in the selected category.
Store preset stations
Up to six stations on each band can be stored as presets, which can then be instantly recalled by pressing the associated preset button.
To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled by pressing the corresponding preset button. Repeat the same steps for the remaining five presets on the current band and for presets on the other four bands. NOTE: Multicast stations can be stored
as presets, but the unit must be in Digital or Auto reception mode to receive them.
VZ309 | 25 |