OPERATION
MUTE
Press 
/MUT button (3) to mute down the sound instantly. Press again to resume the sound.
LOUDNESS
Press BAND/LOU/ENT button (13) for several seconds to reinforce the bass output and “LOUD” will appear on the display. Press it for several seconds again to release this function.
MODE SELECTION
Press MODE button (8) to select radio, USB, memory card play or AUX mode.
REMOTE SENSOR
Point the remote control handset to the remote sensor (24). Press the function keys on the handset to control the system.
AUXILIARY INPUT
The unit can be connected to a portable audio player through the auxiliary input jack AUX IN (22) on the control panel. After finishing the connection, you can press MODE button (8) on the control panel to switch the mode to AUX mode.
RESET FUNCTION
Reset button (23) must be activated with either a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
POWER-DOWN MEMORY FUNCTION
The unit has the
RADIO OPERATION
SELECTING THE FREQUENCY BAND
At radio mode, press BAND/LOU/ENT button (13) shortly to select the desired band.
The reception band will change in the following order:
| FM1 | FM2 | FM3 | AM |
|
|
| ||||
|
|
|
|
|
|
SELECTING STATION
Press 
button (1) or 
button (10) shortly to
7
activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.
AUTOMATIC MEMORY STORING & PROGRAM SCANNING
-Automatic memory storing
Press AS/PS
-Program scanning
Press AS/PS
STATION STORING
Press any one of the preset buttons (17) (1
to 6) to select a station, which had been stored in the memory. Press this button for several seconds to store the current station into the number button.
MONO/STEREO
Press MON button (7) to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation.
USB OPERATION
On the control panel of the unit, there is an USB interface (12). You can connect an USB drive through this interface (12).
When you connect an USB drive through the interface, the unit will search the MP3 files or WMA files in the USB driver and start to play MP3 files or WMA files automatically. If in other mode, you can also press MODE button (8) to select USB mode.
SELECTING TRACKS
Press 
button (10) or 
button (1)
to move to the previous track or the following track. Track number shows on display.
Hold 
button (10) or 
button (1) to fast reverse or fast forward. Normal play starts from when you release the button.
SELECTING DIRECTORY UP/DOWN Press DIR- button (19) or DIR+ button (20) to select directory downward or upward. If the MP3 files does not contain any directory, there is no function of pressing DIR- button (19) or DIR+ button (20).