Safety Instructions
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED HARDWARE.
THIS UNIT IS ONLY DESIGNED FOR REAR SEAT PASSENGER VIEWING AND IS NOT INTENDED FOR VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION. SUCH USE MAY DISTRACT THE DRIVER OR INTERFERE WITH THE SAFE OPERATION OF THE VEHICLE, AND MAY ALSO VIOLATE STATE LAW.
DIRECTED ELECTRONICS, INC. DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT.
■ | Only operate the unit as described in this | ■ | Exposure to moisture or dust can cause |
| guide. Attempts to use or modify this unit |
| harmful damage to the internal electron- |
| contrary to the descriptions in this guide |
| ics. Do not mount near cup holders or in |
| may cause damage and void the warranty. |
| areas where spills may occur. |
■This unit is designed for use in vehicles with standard
Important Safeguards
WHEN CLEANING THE VEHICLE | REPAIRS |
Do not spray this unit with water or cleaning | If the unit stops working for any reason, dis- |
solutions. Moisture and the chemicals found in | continue use immediately and consult with your |
cleaning fluids could damage the unit’s finish | retailer about any necessary repairs. |
and interior electronics. |
|
WHILE DRIVING |
|
This unit is intended for use in the rear seat area |
|
only, and should not be installed in a location that |
|
would allow the driver to view it while driving. |
|
© 2003 Directed Electronics, Inc. | 5 |