JVC TM-910SU Under Scan switch, Pulse Cross switch, Blue Check switch, Color OFF switch

CONTROLS AND FEATURES (cont'd)

<Front Panel>

1

2

VOLUME	PHASE CHROMA	UNDER	PULSE	COLOR	BLUE
		BRIGHT CONTRAST SCAN	CROSS	OFF	CHECK
					POWER
		—A	EXT	NTSC	4:3
		_B	SYNC	PAL	16:9
V.HOLD	PAL	NTSC			ON OFF

3

VOLUMEPHASE

V.HOLD PAL

4

	11	12	13	14
CHROMA BRIGHT	UNDER	PULSE	COLOR	BLUE
	CONTRAST SCAN	CROSS	OFF	CHECK
				POWER
	A	EXT	NTSC	4:3
	B	SYNC	PAL	16:9
NTSC				ON	OFF
5	6	7	8	9	10

11 UNDER SCAN switch

Selects the scanning mode (over scan screen or under scan screen).

(—) :Over scan screen

(_) : Under scan screen

12 PULSE CROSS switch

Checks the retrace period (sync signal) by delaying the input signal.

(—) :Normal screen

(_) : Retrace period display screen

14 BLUE CHECK switch

Selects the screen mode (normal or monochrome blue screen). Useful when you want to check the chroma and phase adjustment.

(—) :Normal screen

(_) : Monochrome blue screen

Note:

*The PHASE adjustment is effective only in the NTSC color system mode.

[How to adjust]

1.Select the monochrome blue screen mode and input color bar signals in the order of brightness.

2.Adjust the CHROMA and PHASE controls until the density and brightness of each blue bar are the same.

13 COLOR OFF switch

Selects the screen mode (color or B/W). Useful when you want to check the white balance.

(—) :Color screen

(_) : B/W screen

Adjust the blue bars to the same

density and brightness.

4