JVC TM-910SU Video a terminals, Video B terminals, EXT Sync terminals, Audio a terminals

Rear

< Rear Panel >

24

1

2

1

2

AC IN

DC IN

12V

+

-

25

	SET UP
	VIDEO A
	IN	OUT
CUT OFF
B
	VIDEO B
R	IN	OUT
G
DRIVE	IN
R	Y/C
	OUT
G	EXT SYNC
	IN	OUT
	AUDIO
	IN	OUT
	A
		B
		NORMAL
		AFC
		FAST

TALLY/

REMOTE

VIDEO A
IN	OUT		15
VIDEO B
IN	OUT
			16
IN
Y/C
OUT
EXT SYNC
IN	OUT		17
AUDIO
IN	OUT
A			18
		B	19
	NORMAL		20
	AFC
	FAST

22

To AC outlet

(120 V AC, 50/60 Hz)

23

15 VIDEO A terminals

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO A terminals *.

*Also refer to the Basic Connection Example on page 7.

16 VIDEO B terminals

Video signal input (IN) and output (OUT) terminals for both composite and Y/C-separated (S-Video) terminals. Each output terminal is bridge-connected.

[BNC terminals]

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

[Y/C (mini-DIN 4-pin) terminals]

IN : Y/C-separated (S-Video) signal input terminal

OUT : Bridge-connected Y/C signal output terminal

Notes:

*For corresponding audio signals, use the AUDIO B terminals (.

*Y/C- terminal has priority.

*Also refer to the Basic Connection Example on page 7.

Y/C terminal pin layout

3 1 Pin No. Signal

IN			1	GND (Y)
	4	2
Y/C
	3	1	2	GND (C)
OUT			3	Y
	4	2	4	C

21

TALLY/

REMOTE

17 EXT SYNC terminals

External sync signal input (IN) and output (OUT) terminals.

The output terminal is bridge-connected.

IN : Input terminal for the external sync signal

OUT : Bridge-connected output terminal

Note:

* Also refer to the Basic Connection Example on page 7.

18 AUDIO A terminals

Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals %.

The output terminal is bridge-connected. IN : Audio input terminal

OUT : Bridge-connected output terminal

Note:

*For corresponding video signals, use the VIDEO A terminals %.

19 AUDIO B terminals

Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO B terminals ^.

The output terminal is bridge-connected. IN : Audio input terminal

OUT : Bridge-connected output terminal

Note:

*For corresponding video signals, use the VIDEO B terminals ^.

20 AFC switch

Selects the AFC (Automatic Frequency Control) time constant for the horizontal sync circuit.

Correct the skewed portion of the picture. NORM position : Normal mode

FAST position : Fast mode (fast: smaller time constant)

(continued on the next page =)

5