JVC KW-AVX900 manual Input Others, Disc Surround*14, 59SETTINGS

Input

Others

Menu items	Selectable settings, [reference page]
External Input*11	For connecting an external component to the CD changer jack on the
	rear.
	Changer/iPod/D. player*12: CD changer, iPod, or D. player
	☞ [44, 46]
	External: Any other than the above. ☞ [50]
	• For connecting the Bluetooth adapter, this setting is not required. It is
	automatically detected.
Beep	Off: Cancels.
	On: Activates the key-touch tone.
Telephone Muting*13	Off: Cancels.
	Muting1, Muting2: Select either one which mutes the sounds while
	using the cellular phone.
Power LED Flash	Off: Cancels.
	On: When the ignition is turned off, the lamp on the	button
	flashes.
TouchPanel Sens.	Change the sensitivity of the touch panel. As the number decreases,
	sensitivity become higher. 1/2/3; Initial 2
Initialize	Initialize all settings you have made in <AV Menu>. Press and hold
	[Enter] to initialize the settings, then reset the unit (☞ page 3).

*11 Not selectable when the component connected to the CD changer jack is selected as the source. *12 The name of the component detected through the CD changer jack is shown.

*13 The TEL MUTING lead connection is required. See Installation/Connection Manual (separate volume).

Disc Surround*14

Menu items	Selectable settings, [reference page]
Surround	On, Off, ☞ [24]
Surround Mode	Auto, Through, Dolby PLIIMovie, Dolby PLIIMusic, ☞ [24]
Panorama	On, Off, ☞ [24]
Center Width*15	00 to 07; Initial 04, ☞ [25]

*14 Selectable only for “DISC”, “SD,” and “USB.”

*15 This setting takes effect only when the center speaker is activated.

Continued on the next page

59SETTINGS