JVC KW-AVX900 manual More about this unit, General

Page 64

More about this unit

General

Turning on the power

By pressing SOURCE on the monitor panel, you can also turn on the power. If the source is ready, playback starts.

FM/AM

Storing stations in memory

When SSM is over, received stations are preset in No. 1 (lowest frequency) to No. 6 (highest frequency).

Disc

General

In this manual, words “track” and “file” are interchangeably used.

This unit can also play back 8 cm discs.

This unit can only play back audio CD (CD-DA) files if different type of audio files (MP3/WMA/WAV/AAC) are recorded in the same disc.

This unit can display only one-byte characters. No other characters can be correctly displayed.

Inserting a disc

When a disc is inserted upside down or has no playable files, “Cannot play this disc Check the disc” appears on the monitor. Eject the disc.

Ejecting a disc

If “No disc“ appears after removing a disc, reattach a disc or select another playback source.

If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

Speaker/signal indicators for DVD

Speaker indicators

Signal indicators

The speaker indicators—square around the letters lights in light blue when the corresponding speakers are set to <Large> or <Small>.

The center speaker indicator—square around “C” lights in light blue, when the center speaker is set to <Large> or <Small> and when surround is activated.

Sounds come out of the speakers whose speaker indicators are lit.

The SW indicator lights up when <SW (Subwoofer)> is set to <On>.

The signal indicators indicate the incoming signals—L (front left) / R (front right) / C (center) / LFE (low frequency effect) / LS (left surround) / RS (right surround) / S (monaural surround).

If the speaker is activated, but the signals corresponding to the speaker are not coming in, the signal indicators changes their color from white to black to indicate no signals coming in.

Changing the source

If you change the source with Dual Zone deactivated, playback also stops without ejecting the disc.

Next time you select “DISC” for the playback source, disc play starts from where it has been stopped previously.

64

Image 64
Contents KW-AVX900 Thank you for purchasing a JVC product Chemical changes occur inside, causing malfunctionPossible performance from the unit Contents Playable disc type Disc type Recording format, file type, etcDual Disc CD-R/-RW5INTRODUCTION Installing the battery Before using the remote controllerFor Bluetooth operations 7INTRODUCTIONFor FM/AM operations For TV operations~ Turn on the power Display AV Menu Display the Setup menu @ Set the clock settings¤ Finish the procedure Select OffCommon operations 9OPERATIONSPress SOURCE, then press TUNER. Listening to the radioPress Band Press 4 or ¢ to search for a station-Auto Search Tuning in to stations with sufficient signal strength Press Mode11OPERATIONS ThenTo select directly on the touch panel To select from the Preset ListOn the remote On the unit Disc operations 13OPERATIONS~ Open the monitor panel Press OpenSpeaker/signal Surround mode Indicators While playing the following discs, press15OPERATIONS While playing a DTS-CD Operation buttons on the monitor screen To erase the operations, touch the screen againTo cancel, select Off RepeatTo cancel the prohibition, repeat the same 19OPERATIONSSelecting tracks on the list Select a folder 1, then a trackOperations using the remote controller-RM-RK251 21OPERATIONS Using Original Program/Play List screensWhile playing To cancel PBC playback During PBC playbackUsing the list screens 23OPERATIONSPlaying back a bonus group Selecting browsable still pictureOnly when selecting Dolby PL IIMusic Enjoying surround soundsTo turn on the surround Dolby PL II Movie Activates Dolby Pro Logic II MovieOn the remote controller Operations using the on-screen bar25OPERATIONS To remove the on-screen barOn-screen bar OFF Deactivates Dual Zone 27OPERATIONSTV You can watch the TV programs To select a track To select a folder or trackSelect a folder or track 29OPERATIONS Operations using the list screenTo change the playback modes SD operations Insert a SD card⁄ Close the monitor panel You can also pressTo cancel, select Off File type Intro Repeat Random 31OPERATIONSPress SOURCE, then press USB. USB operationsDo not start the car engine if a USB device is connected 33OPERATIONS Folder Repeats current folderPress AV Menu Press Mode Watching TVPress SOURCE, then press TV. Preparation35OPERATIONS To display the operation buttons while watching TV Changing on-screen informationKEY To register using Open Registering a Bluetooth device Registration Pairing methodsTo do OpenTo register using Search To connect a special device Special DeviceTo connect/disconnect a registered device To delete a registered devicePress SOURCE, then press Bluetooth PHONE. When a call comesPress AV Menu To end the callWhen an SMS comes To make a callTo redial the dialed numbers How to enter phone numberDial Calls the entered number To call a preset number Presetting the phone numbersPress Bluetooth Press Dial Menu, then Calls, or Missed CallsBluetooth Information ~ Press SOURCE, then press Bluetooth AUDIO.Start playback Listening to the CD changer Display the Disc List⁄ Select a disc to start playing Changer with your unitEx. To select Track Repeat for an MP3 disc for CDs, Intro Repeat RandomCurrent disc Loaded discsListening to the iPod/D. player Selecting a track from the player’s menuPlayback starts automatically Press 4 or ¢ to select a trackAll or Repeat Mode =All Press ∞ to confirm the selectionRepeat steps 2 and 3 to select a track =OnUsing other external components Press SOURCE, then press AV-IN.Touch the screen center portion Touch the screen center portionNavigation screen When Navigation is selected for AV Input.Make sure Navigation is selected for AV Input. ~ Press SOURCE, then press EXT-IN. External DevicesMake sure External is selected for External Input. Selecting sound mode 51SETTINGSSelect a sound mode Storing your own adjustment Repeat steps ~and Ÿ, then in step Adjust 1, then store⁄ Finish the procedure Assigning titles to the sourcesAssign a title ~ Select the source.Change the setting Ex. Changing the AV Input setting 53SETTINGSMenu operations Setup Menu items Demonstration Wall Paper Color Scroll DimmerWarp Drive, X-Face, Wave, Ring Green, Dark-Red, Brown, Black55SETTINGS DisplayDisc 57SETTINGS Regardless of the setting aboveFront Small, Large Center None, Small, LargeTuner InputMenu items If Band Width AV Input*9Input Others 59SETTINGSDisc Surround*14 Equalizer SoundBluetooth*19 SettingsMode*18 ListEstablish the connection with it Disconnect Only for the device being connectedMenu items Auto Connect *22 Auto Answer *23 Reject The unit rejects all incoming callsMaintenance To keep discs cleanHow to handle discs Moisture condensationMore about this unit GeneralFile playback 65REFERENCESMP3 files encoded with Layer 1/2 Files which have the data such as AIFF, ATRAC3, etcCD changer IPod/D. player operations67REFERENCES Icons for phone typesMenu settings Title assignmentAbout sounds reproduced through the rear terminals Official DivX Ultra Certified productCharacters shown on the monitor Preset equalizing values69REFERENCES Language codes for DVD/DivX language selection LanguageGeneral Symptoms Remedies/Causes Troubleshooting71REFERENCES Disc in general Symptoms Remedies/Causes GeneralSymptoms Remedies/Causes 73REFERENCESBluetooth CD changer Symptoms Remedies/Causes 75REFERENCES IPod/D. playerSpecifications Amplifier FM/AM Tuner DVD/CD77REFERENCES USB Monitor GeneralHaving Trouble with operation? Parts list for installation and connection Installing the remote controllerWhen installing the unit in a Nissan car Precautions on power supply and speaker connections Electrical ConnectionsConnecting the AV I/O cord Installing the TV aerialsConnecting the parking brake lead Attaching the TV aerialsConnecting external components Connecting the external amplifiersUSB devices