Jensen VM9022HD operation manual Operating Instructions

Page 18

VM9022HD

OPERATING INSTRUCTIONS

Power On / Off

Press the /SRC button (6) (or any other button on the front

of the unit except reset), or the /POWER button (4) on the remote control, to turn the unit on. The buttons on the front of the unit light up and the current mode status appears on the TFT screen (17).

Press and hold the button to power off the unit.The monitor is drawn back into the main compartment.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu.

Volume Adjustment

To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOL- buttons (15, 16) on the remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0” to “40”. The TFT screen displays the volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit off. To program a specific turn-on volume level, turn the AUDIO control (2) to adjust the volume to the desired turn-on volume. Push and hold the AUDIO button while the yellow speaker icon and level indication is displayed on the screen. The unit will beep two times to confirm your turn-on volume setting.

Mute

Press the MUTE button on the front panel (8) or remote control (3) to mute the volume from the unit. Press the MUTE button again to restore the volume. “MUTE” is displayed on the screen. Adjusting the volume or using any of the audio setup features cancels the mute function.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a telephone call is received by a cell phone.

Steering Wheel Control (SWC)

The VM9022HD is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter SWI- PS. A 3.5mm female connector (labeled “SWC Interface”) on the back of the head unit allows connectivity to the PAC

adapter. Please refer to the instructions included with the PAC adapter for detailed installation information.

SWC Functions

The following controls are available for most vehicles:

1.Vol Up

2.Vol Down

3.Mute

4.Seek Up / Next Track / ** Preset Up

5.Seek Down / Previous Track / ** Preset Down

6.SRC (Source)

7.** Select

8.** Select

9.Band

**If additional steering wheel control buttons are available on the vehicle, function 7 / 8 may be assigned the "Select" feature. This feature / function may not be available on some vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is pressed momentarily, Preset Up will be selected. If "Select" (function 7 or 8) is held down and function 5 is pressed momentarily, Preset Down will be selected.

Playing Source Selection

Press the SRC button on the front panel (6) or remote control

(8)to change between available playing sources in the following order: RADIO, SAT, DISC, NAV, BT, iPod, SD, USB, AUX1, AUX2 and CAMERA. The playing mode is displayed on the TFT screen.

Auxiliary Devices

External peripheral devices can be connected to this unit via RCA output (AUX IN 2) or the MediaLink4.

iPod Connector

(GEN 5 Recommended)

MediaLink USB Connector (Type A)

3.5mm - Audio VIDEO

LEFT

RIGHT

RCA Inputs (AUX 1)

3.5mm Left & Right

Stereo Inputs (AUX 1)

Select “AUX1” to play an auxiliary device connected via the MediaLink RCA or 3.5mm inputs. For example, you can play

music files from a portable music player, video from a video camera and even view photos stored on a digital camera.

Select “AUX2” mode to access and control auxiliary devices connected to the “AUX IN 2” inputs on the back of the radio.

01:53 PM

AUX1 No Video Signal

E

Q

R

E

A

R

P

I

P

Stereo

PLII Music

Selecting a Source while Navigating

While navigating, other sources may be selected and listened to such as AM-FM Tuner, CD, etc. To select a source, press

the /SRC button (6) and then select a source from the Front Source Menu. Navigation voice prompts will be heard automatically, although the navigation map cannot be seen. (The selected source audio will be muted until the navigation voice prompt command is completed, after which the source audio will resume.)

Source Menu

To access the SOURCE MENU, touch the TFT screen in the top left corner of the screen.

DISC

SOURCE MENU

 

 

 

 

 

 

F

DISC

SD

USB

NAV

R

 

 

 

 

O

 

 

 

 

N

 

 

 

 

T

RADIO

SAT

iPod

BT

R

 

 

 

 

 

 

 

 

E

 

 

 

OFF

A

 

 

 

R

AUX 1

AUX 2

CAMERA

 

 

14

Image 18
Contents VM9022HD Page Contents Page Features PreparationWhat’s in the Box Disconnecting the BatteryOptional Equipment Tools and SuppliesConnections Through MediaLinkCompatible SAT Tuners Installation Install Bracket HereM5X6 Installing the MediaLink External AV Connector M3x4Entering the Default Password ANTI-THEFT FeatureSetup Changing the PasswordControls and Indicators Button OperationUp joystick Pause/Play/EnterRight joystick TFT Display RearRemote Control Remote Control Functions Function Name Ref#IPod PIC NAV SetupBand OpenUsing the TFT Monitor Operating Instructions Audio Adjustments System ResetFunction Adjustment Options Audio Control MenuMULTI-ZONE Operation Adjusting a Feature Setup MenuAccessing Menu Items Setting Options FunctionExiting the System Setup Menu Tuner Operation Using Preset Stations Auto Store ASPTY Search Satellite Radio Operation Category Guide Mode SATDVD/VCD Video Operation Viewing an Alternate Picture Angle DVD Only Moving Through ChaptersDirect Chapter / Track Selection ZoomingGeneral Disc Information Symbol MeaningDisc Symbols Symb 12cm Disc Properties Max Play TimeDVD/CD Audio Operation CD Player User InterfaceDirect Track Entry Loading an SD Card MP3/WMA OperationMP3/WMA Media and File Requirements Loading a USB DeviceMP3 User Interface Controlling MP3/WMA Disc PlaybackPlaying MP3/WMA Files IPod User Interface Controlling Your iPodIPod Direct Track/File Entry Bluetooth User Interface Bluetooth OperationAbout Bluetooth Hands Free Profile HFPMaking an Outgoing Call ReconnectingManaging Incoming Calls Call TransferAuto Answer Bluetooth SetupAdvanced Audio Distribution Profile A2DP Auto ConnectTroubleshooting Problem Cause Corrective ActionTroubleshooting Error Messages Error MessagesMessage Displayed Cause Corrective Action Care and Maintenance Specifications VM9022HD Limited Warranty Do not Return this Product to the StorePage