Jensen VM9022HD ANTI-THEFT Feature, Setup, Entering the Default Password, Changing the Password

VM9022HD

ANTI-THEFT FEATURE

The VM9022HD is equipped with an anti-theft feature requiring the user to enter a password upon initial power on.

Enter Password:

1	2	3
4	5	6
7	8	9
0

Entering the Default Password

The default user password is 012345 (6 digits). Enter the password using the on-screen keypad and then press the Enter (arrow) button. You can also use the remote control keypad to enter the password.

Press the joystick Enter button (18) on the remote control to confirm.

Changing the Password

To change the anti-theft and RATINGS protection password, perform the following steps:

1.Press the SETUP button (31) on the remote control or

touch the button on the screen to enter the “SETUP” menu.

2.Touch RATING to view the “RATING” sub-menu. An open lock icon to the right of the “Password” field indicates that a user password had not yet been entered.

3.Touch the keypad icon next to the blue box in the “Password” field to open the on-screen keypad.

02:40 AM

RADIO	SETUP
General	Language	Audio	Speaker	Bluetooth		Back
RDS	Password
Rating				1	2	3
Demo	Rating		8. Adult	4	5	6
Hardware	Load Factory		Reset	7	8	9
P.VOL				0
TS Cal					Clear

4.Enter a new 6-digit password and press the Enter (arrow) button.

The "lock" icon will now appear closed and the new anti- theft password will be set, as well as the password for RATING protection (see “Rating Sub-menu Features” on page 18).

NOTE: If you forget your password, contact Customer Service at 1-800-323-4815 for assistance.

7