Operating Instructions

UV8035

Power On/Off

Press and hold the (power/mute) button (1) or short press any other button on the control panel (except open/eject) to turn the unit on.

Press and hold the power/mute button again to turn the unit off.

NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out will return to normal when the temperature inside the vehicle increases to a normal range.

Volume Control

Turn the rotary encoder (4) to increase/ decrease the volume level, shown on display panel, from “00” to “46”. The display will automatically return to the normal indication 5 seconds after the last volume adjustment or when another function is activated.

display. Press the power/mute button again to restore audio output to the previous level.

Mode Selector (MODE)

Press this MODE button (9) to select a different mode of operation, as indicated on the display panel. Available modes include TUNER, DISC, CARD (SD), AV IN 1, AV IN 2.

AV IN/OUT Connector

Use the AV IN/OUT connector (21) to connect a portable media device for playback through the vehicle sound system.

1 Left Audio

2 Right Audio

3 Ground

4 Video

3.5mm A/V Cable ( not included )

See “AV Connector” on page 12 to learn how to reverse the AV IN/OUT connector from IN to OUT.

NOTE: For iPod or Zune video playback, please refer to owner's manual that came with your device. Please complete any photo or video setting adjustments before connecting the device to this unit.

Mute

Press the power/mute ( ) button (1) to mute the audio output “MUTE”appears on the