Detachable Control Panel

UV8035

•DO NOT insert the control panel from the left side. Doing so may damage it.

•Do not put pressure on the display or control buttons when handling the front panel.

•Do not touch the electrical terminals on the front panel or main unit.

•Remove dirt or foreign substances with a clean, dry cloth only.

•Do not expose the front panel to extreme temperatures or direct sunlight.

•Keep volatile agents such as benzene, thinner or insecticides away from the front panel.

•Do not disassemble the front panel.

•When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage.

•Make sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other malfunctions.

Removing the Control Panel

The front panel release button (3) releases the mechanism that holds the front panel to the chassis. To detach the front panel, perform the following steps:

1.Turn the power off.

2.Press the release button.

3.Grasp the left side to release the front panel and then pull it an an angle to remove the right side from the chassis.

4.Store the front panel it in the supplied carry- ing case to protect it from dirt and damage and take it with you to prevent theft.

Release

Button

Control Panel

Attaching the Control Panel

Before re-attaching the front panel, make sure the electrical terminals on the back of the panel are free of dust and dirt, as debris could cause intermittent operation or other malfunctions.

To attach the front panel:

1.Insert the right side of the control panel into the main unit, making sure the panel is attached at the T-joint (see diagram).

2.Push the left side of the control panel near the middle until a “click” sound is heard.

PUSH