Jensen UV8035 owner manual Audio Menu Button

Page 12

UV8035

Clock

Turn the rotary encoder (4) to the right to adjust the minutes or to the left to adjust the hour.

Time Form

Turn the rotary encoder to adjust the clock format from “12 Hours” to “24 Hours”.

AV Connector

By default, the AV connector (21) on the front panel is designated as “IN”. Use the rotary encoder to change the source to “OUT”, allowing you to output the audio/video source from the built-in DVD player to another device.

Tuner Set (Local/Distant)

Turn the rotary encoder to choose “Local” or Distance”. Local mode favors access to local stations whose signals are much stronger.

Tuner Area

Turn the rotary encoder to choose the appropriate frequency spacing for your area: U.S.A., Latin, Europe, or Orit (Russia).

Beep Tone

Turn the rotary encoder to choose whether and audible beep is heard when a function is selected: “BEEP ON” or “BEEP OFF”.

Programmable Turn-On Volume (Vol PGM) Turn the rotary encoder to select the default turn-on volume level. “VOL PGM 12” is the default setting.

Rear Speaker On/Off (Rear Spk)

Turn the rotary encoder to turn the rear speaker on/off. It is recommended to turn the rear

speaker “OFF” when using headphones. When the rear speaker is “OFF”, the “FADER” audio function is disabled.

Internal Amplifier (Inter Amp)

Turn the rotary encoder to turn the system’s built in amplifier on/off. It is recomended to turn the internal amplifier “OFF” when connected to an external amplifier.

Audio Menu Button

Press the rotary encoder (4) repeatedly to access the Audio Menu functions, including sub-menu items. Use the tune/track < or > buttons (18, 19) to cycle through only the top- level menu functions, and then press the rotary encoder to select the various adjustment options for that feature. Turn the rotary encoder to select settings for each option. The unit automatically exits audio control mode after five seconds of inactivity.

Sub-W

Only appears when subwoofer function is turned on. See “Subwoofer (SUB-W)” on page 13.

X-Bass

Only appears when X-Bass function is turned on. See “Bass Boost (iX-BASS)” on page 14.

BASS

To adjust Bass options, press the rotary encoder (4) until “BASS” appears in the display. Continue pressing the rotary encoder to access the following Bass settings:

LEVEL

Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the Bass level from “-6” to “+6”. “00” represents a flat response.

Bass Center Frequency (C. Frq)

Turn the rotary encoder to adjust the Bass Center Frequency to 60, 80, 100 or 200Hz.

Bass Quality Factor (BassQ)

Turn the rotary encoder to select one of the following Bass Quality Factor options: 2N, 1N, 1W, 2W. The following chart depicts the curve characteristics for each step:

Bass Quality Factor Curve Characteristics

Middle

To adjust Mid-Range options, press the rotary encoder (4) repeatedly until “Middle” appears in the display. Continue pressing the rotary encoder to access the following Mid-Range settings:

12

Image 12
Contents UV8035 Preparation Installation Instructions Important NotesTrim Plate Installation Removing the UnitDIN Rear Mount Method B Wiring ParkingDetachable Control Panel Removing the Control PanelAttaching the Control Panel Remote Control Operating Range Replacing the Battery Remote SensorOperating Instructions Display Selector D System Menu D/MENUAudio Menu Button Subwoofer SUB-W BalanceFader TrebleBass Boost iX-BASS Tuner Operation CD/DVD Operation Insert Disc OpenEject Disc Open Controlling PlaybackDirect Track Access Goto Track SelectionFast Forward/Reverse Repeat PlayDVD Playback Features VCD PlayBack Control PBCJpeg CD Operation Playback ControlsAccessing Card Mode Memory Card OperationInserting an SD or MMC Card Removing an SD or MMC CardDual Zone Operation Turning Dual Zone On/OffSelecting Front/Rear AV Sources Front/Rear Source ControlsSystem Setup Menu Language SettingsVideo AudioRating Care and Maintenance Handling Compact DiscsSpecifications Technical SpecificationsCD-R and CD-RW Capability Limited Warranty