UV8035
CD/DVD OPERATION
Insert Disc (OPEN)
Press the OPEN button (8) to open the front panel and reveal the disc slot. With the label surface facing up, gently insert the disc into the slot until the
NOTE: The unit is designed for play of standard 5” (12 cm.) compact discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit, either with or without an adaptor, as damage to the player and/or the disc may occur. Such damage will not be covered by the warranty on this product.
Eject Disc (OPEN)
When the OPEN button (8) is pressed while a disc is inserted, disc play is stopped and the disc is ejected. The unit will revert to Tuner operation. If the disc is not removed from the unit within 15 seconds, the disc will be re- loaded.
NOTE: To prevent a disc from accidentally being damaged, always remove the disc from the unit when disc play is finished.
Controlling Playback
After inserting an audio disc, the player automatically plays the first track. The elapsed playing time is displayed in the right corner. When the track is finished, the next track will play automatically. Press the 2/STOP button
(11)to stop playback of the current file. The MP3 user interface is shown below:
•Use the 
, 
, 
or 
buttons on the remote control to navigate the
•Press the 
button on the remote control
or the 5> button (14) on the control panel when the highlighted file is in the column on
the far | right to display the next ten files. |
•Press the 
button on the remote control or the 6< button (6) on the control panel
when the highlighted file is in the column to the far left to display the previous ten files.
•Press OK when a file number is highlighted or after numeric input to begin playback of the selected file.
•Use the remote control numeric buttons (0- 9, +10) to enter and play a file number directly. Press the +10 button repeatedly to select a number in the tens position for direct track entry (for example, to select track “44”, press the +10 button four times and then press the 4 button).
Disc Play/Pause
Press the 1/PAUSE button (10) to freeze disc play. Press 1/PAUSE again to resume disc play.
Disc Stop
Press the 2/STOP button (11) to stop disc play and retain the playback position (DVD, VCD, CD). Press 2/STOP twice if you want to resume playback from the beginning of the disc. Press 1/PAUSE to resume disc play.
NOTE: After the last track on a disc is played, the unit will stop playback. Press 1/ PAUSE to play from the beginning of the disc.
16