Front Panel Release, Detaching the Front Panel

VM8013

FRONT PANEL RELEASE

The front panel release button (4) releases the mechanism that holds the front panel to the chassis.

Detaching the Front Panel

To detach the front panel, perform the following steps:

1.Press the power button (1) to turn the unit off.

2.Press the front panel release button to flip the panel down.

3.Grasp the right side to release the front panel and then pull it at an angle to remove the right side from the chassis.

4.Store the front panel it in the supplied carrying case to protect it from dirt and damage and take it with you to prevent theft.

Re-attaching the Front Panel

Before re-attaching the front panel, make sure the electrical terminals on the back of the panel are free of dust and dirt, as debris could cause intermittent operation or other malfunctions.

To re-attach the front panel:

1.With the panel laying flat (in the “open” position), insert the left side of the panel in place until correctly engaged.

2.Gently press the right side of the panel until the mechanism locks it into place.

3.Lift upward to close the panel.