Technicolor - Thomson EZCRG TV Power Button, SKIP/SEARCH Button, TV/CATV Button, VCP Power Button

Page 10

1.TV POWER Button

Press this button to switch the unit on or off .

2.Number Buttons (0-9)

Press these buttons to make a direct TV channel selection. The channel number chosen will be displayed on the screen for about 4 seconds.

3.SKIP/SEARCH Button

a.Press this button until SKIP MODE ON is displayed on the screen.

Then use the channel up and down buttons’; the TV will stop only on the active TV channels.

b.Press the skip search key until SKIP MODE OFF is displayed on the screen. Then all the TV channels will be shown using the channel up and down buttons.

4.TV/CATV Button

Press this button to select the regular 69-channel Broadcast TV and the 125- Channel Cable TV (Standard Cable, HRC Cable, and IRC Cable) with the on- screen display.

5.VCP POWER Button

Plug in the unit; the power indicator will turn on. Press this button to switch the VCP on or off . The indicator will be brighter when the unit is on.

6.REW Button

a.Press this button once in the playback mode, the VCP enters the reverse picture search mode and the tape will rewind rapidly with the pictures. The rewind indicator lamp will blink. Press this button once more, and the tape will rewind at a high speed with the lamp blinking more quickly.

b.Press this button in the stop mode; the tape will rewind at a very high speed without any picture and sound.

c.Press this button once in the (fast) forward mode; the VCP enters the reverse picture search mode and the tape will rewind rapidly with the pic- tures. The rewind indicator lamp will blink. Press this button once more, and the tape will rewind at a high speed.

7.F. FWD Button

a.Press this button once in the playback mode; the VCP enters the forward picture search mode and the tape advances rapidly with the pictures. The fast forward indicator lamp will blink. Press this button once more, and the tape will advance at a high speed with the lamp blinking more quickly.

b.Press this button in the stop mode, the tape will advance at a very high speed without any picture and sound.

c.Press this button once in the (fast) rewind mode; the VCP enters the for- ward picture search mode and the tape advances rapidly with the pictures. The fast forward indicator lamp will blink. Press this button once more, and the tape will advance at a high speed.

10

Image 10
Contents Ezcrg Precaution IntroductionPage Contents in Kit Tools Required not suppliedPage Page Detail Watching TV Connecting an External Antenna Refer to FigureWatching a Movie Remote Control Operation Refer to Figure Sending AV signals Refer to FigureUsing a Headphone Playing a video gameSKIP/SEARCH Button TV Power ButtonVCP Power Button TV/CATV ButtonCH Down Button TV/VIDEO ButtonCH Up Button VOL Up ButtonSpecifications System Ntsc