A. Introduction
The EZCRG is a
Installed between the driver and passenger front seats, with a floor mounting plate available for most cars, vans and trucks. This aesthetic console is constructed of
B. Precaution
1.Use only good quality VHS tapes and discard worn out tapes to prevent video head clogging. If the heads get dirty over a period of time during normal operation of the VCP, and the automatic tracking control will not remove the snow from the picture we recommend using a cleaning cartridges sparingly to restore normal picture.
2.In order to maintain a safe mounting arrangement, this console must be secured to the floor of the vehicle according to Installation Guide contained in this manual. Failure to do so may result in the console becoming a projectile in the event of an accident.
3.Before working under the vehicle, block the wheels to prevent accidental injury.
4.Before drilling any holes in the vehicle, verify that the drill bit will not enter into the frame rail(s) of the vehicle of damage electrical wires, fuel lines, brake lines, hoses, exhaust system components or any other items that will impair that operation of the vehicle. The console must be secured to the floor panel of the vehicle. Check under the vehicle to ensure that the holes will be in the proper locations. Also check under the carpet to ensure that there are no wiring harnesses, fuel lines, etc. that could be damaged when drilling through the floor pan of the vehicle.
CAUTION: Children should not be allowed to wear headphones unless carefully supervised. The headphone wires may become entangled and induce choking.
5.Do not use gasoline, thinners or other thinning liquids to clean the unit. Remove dust and stains with a damp cloth.
6.Do not cover the unit with a cloth during operation; the internal temperature will rise and may damage the unit.
2