Russound CAM6.6T-S1 SRC2 Remote Control SRC2 Control of Tuner, Bank/Memory Presets

USER

INTERNAL SOURCE - AM/FM TUNER

SRC2 Remote Control

SRC2 Control of Tuner

Selecting the tuner

To select the tuner, push and choose the source number preassigned to the AM/FM tuner (1), or use the UNO numeric source inputs at the bottom of the SRC2.

Selecting the desired band

Push to toggle between AM/FM reception.

Frequency Scan

To scan, press and hold then release . The tuner scans through tuned stations with a 5-second preview before moving to the next station. To end

scanning, press again.

Selecting a Bank

To select a bank, press and hold for bank up

or for bank down.

Selecting the desired frequency

Use the Channel and or and

for manual tuning. To move quickly through the chan- nels, press and hold the button for more than 1.5 seconds. To directly select a station, enter the three- or four-digit channel or frequency (1071 for 107.1, etc.). European regions use five-digit station frequen- cies.

Frequency Seek

The SEEK function is performed by pressing and

releasing the Select or or . To seek

higher frequency station press . Press for lower frequencies. Tuning begins at the current fre- quency, seeks upward (or downward) and stops at the

next tuned station. Pushing or again con- tinues the SEEK function. Once the highest frequency is reached, the tuner continues SEEK mode at the lowest frequency.

Bank/Memory Presets

The AM/FM tuner has six banks of preset memory settings, and each bank holds six presets for a total of 36 possible presets.

Memory Preset Programming

1. Select a bank - press and hold or

until the desired bank # (1-6) appears on the keypad. 2. Select a station - tune to the desired frequency

with , , or .

3.Press and hold a # button (1-6) until M(#) SA(ved) is displayed.

Recalling a Memory Preset

Press and to scroll through a loop dis-

play of all the configured memory presets for the cur- rently selected bank.

Mute

Press the button to mute/unmute the tuner audio output.

18