Russound CAM6.6T-S1 Macro ID, Macro Name, Command NUM, Selected Macro, Selected Delay

	INSTALLER
	INSTALLATION MENU
1. MACRO ID –	Number of Macro up to 132 including any previously named
(MacID)	macros.
2. MACRO NAME –	Name of Macro (optional).
(MacNm)
3. COMMAND NUM –	Number of Command up to 10.
(Cmd#)
4. COMMAND TYPE –	Select the type of source command (e.g., CD, TV, etc.).
(CmdTp)
a. Selected: Learned IR	Choose Learned IR if the pre-programmed IR code library does
(LrnIR)	not support the source component.
i. LEARNED SRC –	Select the learned source bank to be assigned to the source
(LnSrc)	component. Procedure advances to KEY FUNCTION (step 6)
b. Selected: Unassigned	Selected command and subsequent commands are cleared.
(Unasg)	Procedure advances to COMMAND NUM (step 3)
c. Selected: Default	Default selects the same device type and device code previously
(Deflt)	setup in BASIC SETUP. Procedure advances to KEY FUNCTION
	(step 6)
d. Selected: Macro:
(Macro)
i. MACRO -	A macro can “call” another macro if a sequence of more than 10
(Macro)	commands is needed.
ii. MACRO ID –	Enter the macro ID number. Menu advances to COMMAND NUM
(MacID)	(step 3)
e. Selected: Delay	Enter a 1- to 60-second delay time to postpone delivery of the
(Delay)	next command in the macro. Procedure advances to COMMAND
	NUM (step 3)
f. All Other Selections:	Procedure advances to DEVICE CODE (step 5)
5. DEVICE CODE –	Source component code for IR control.
(DevCd)
6. KEY FUNCTION –	Select a function (Play, etc.).
(KeyFn)

61