Russound CAM6.6T-S1 instruction manual Auto PLAY?, Save CHANGES?, KEY Name, Selected Default

Select the zone the key will be configured for. Changes are made for that zone only; default setting is “All Zones.”

Select the source the key will be configured for.

INSTALLER

INSTALLATION MENU

9. AUTO PLAY? –	“Yes” tells the CAM6.6 to issue a PLAY command whenever the
(AtoPl)	source is selected for listening. This option is skipped if the
	source type (COMMAND TYPE) chosen does not have a PLAY
	command associated with it.
10. SAVE CHANGES? –	Select “yes” to save changes. Procedure returns to SOURCE
(Save?)	NUM to allow configuration of another source.

KEY CONFIG (KeyCf)

Key Configuration defines zone-specific key functions for each source. See Key Config. - Flow Chart on page 66

1. ZONE NUM – (Zone#)

2.SOURCE NUM – (Src #)

3.SELECT A KEY – (SelKy)

4.KEY TYPE – (KeyTp)

Using or , select the keypad key to be configured.

Either “Key Press,” “Key Hold” or “Both” will activate the command.

5. KEY NAME –	Name that appears on the keypad display when the command is
(KeyNm)	activated.
6. COMMAND TYPE –	Select the type of source command (e.g., CD, DVD, etc.).
(CmdTp)
a. Selected: Learned IR – Choose Learned IR if the pre-programmed IR code library does
(LrnIR)	not support the source component.
i. LEARNED SRC –	Select the learned source bank to be assigned to the source
(LnSrc)	component. Procedure advances to KEY FUNCTION (step 8)
b. Selected: Unassigned	The key configuration is cleared. Procedure advances to SAVE
(Unasg)	CHANGES (step 9)
c. Selected: Default	Default selects the same device type and device code previously
(Deflt)	setup in BASIC SETUP. Procedure advances to KEY FUNCTION
	(step 8)
d. Selected: Macro:	(To build macros, see Macro Editor page 61)
(Macro)

52